Connecting The System - Pioneer AVIC-Z140BH Installation Manual

Multimedia navigation receiver
Hide thumbs Also See for AVIC-Z140BH:
Table of Contents

Advertisement

Available languages

Available languages

Section
02

Connecting the system

Connecting the system
The navigation unit
USB and mini-jack
connector
2 m (6 ft. 7 in.)
( * 1)
( * 2)
( * 1)
Connect either the
USB interface cable
for iPod or an
appropriate USB
storage device.
( * 2)
— When connecting your iPod, both connections are necessary.
— You must set "AV1 Input" in "AV System Settings" to "iPod" when
connecting the iPod. (For details, refer to Operation Manual.)
8
En
Blue
(*3)
30 cm
(12 in.)
Vehicle
antenna
( * 3)
If you use AVIC-X940BT, you will need to
install the Traffic tuner (ND-TMC10) sold
separately.
Wired remote input
Please refer to the instruction
manual for the Hard-wired remote
control adapter (sold separately).
Antenna
jack
1 m
(3 ft. 3 in.)
Traffic tuner
IP-BUS cable
(supplied with
XM Satellite
Radio tuner)
Black
XM Satellite Radio tuner
(e.g. GEX-P920XM)
(sold separately)
iPod with
Dock Connector (*4)
(*4)
For details concerning
operations and
compatibility, refer to
Operation Manual.
Dock
Connector
port
USB interface cable
for iPod
(CD-IU51V)
(sold separately)
Blue
Blue

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-x940bt

Table of Contents