JVC XV-N372S Instructions Manual
Instructions
Hide thumbs
Also See for XV-N372S:
- Instructions manual (25 pages) ,
- Information sheet (1 page) ,
- Instructions manual (24 pages)
Chapters
Table of Contents
Troubleshooting
Related Manuals for JVC XV-N372S
Summary of Contents for JVC XV-N372S
-
Page 1: Dvd Player
DVD PLAYER XV-N370B XV-N372S For Customer Use : Enter below the Model No. and Serial No. which are located on INSTRUCTIONS the rear of cabinet. Retain this information for future reference. Model No. Serial No. LVT1874-001A... - Page 2 CAUTION: The apparatus should not be exposed to water CAUTION (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. RISK OF ELECTRIC SHOCK DO NOT OPEN FCC WARNING: This equipment may generate or use CAUTION: TO REDUCE THE RISK radio frequency energy.
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERʼS MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. -
Page 4: Table Of Contents
Contents Introduction ....5-8 Operations ....14-19 General Features ..... . .14 About the Symbol Display . -
Page 5: Introduction
Introduction To ensure proper use of this product, please read this Notes on Discs ownerʼs manual carefully and retain it for future reference. Handling Discs This manual provides information on the operation Do not touch the playback side of the disc. Hold the and maintenance of your DVD player. -
Page 6: Types Of Playable Discs
Types of Playable Discs Regional Code This unit has a regional code printed on the rear of the (8 cm / 12 cm disc) unit. This unit can play only DVD discs labeled as the same as the rear of the unit or “ALL”. Video CD (VCD/SVCD) (8 cm / 12 cm disc) Notes on Regional Codes... -
Page 7: Front Panel
Front Panel a 1/' STANDBY/ON f N (PLAY) Switches the unit ON and OFF. Starts playback. b Disc Tray g x (STOP) Insert a disc here. Stops playback. c Z (OPEN/CLOSE) h . (SKIP) Opens or closes the disc tray. Returns to the beginning of current chapter or track or go to the previous chapter or track. -
Page 8: Remote Control
Remote Control DISPLAY STANDBY/ON (1/') Accesses On-Screen Display. Switches DVD Player ON and OFF. DVD MENU OPEN/CLOSE (Z) Accesses menu on a DVD disc. Opens and closes the disc tray. b / B / v / V (left/right/up/down) Selects an item in the menu. PAUSE/STEP ( X ) ENTER ( Pauses playback temporarily/ press... -
Page 9: Installation And Setup
Installation and Setup Setting up the Player Video and Audio Connections to Your TV The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, Make one of the following connections, depending on position the player away from the TV, VCR, or radio, the capabilities of your TV. -
Page 10: Audio Connection To Optional Equipment
Audio Connection to Optional Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro Logic: Connect the left Equipment and right AUDIO OUTPUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A). -
Page 11: Displaying Disc Information On-Screen
When you turn on for the first Initial Settings time By using the Setup menu, you can make various adjustments to items such as picture and sound. The menu for a language selection will appear when You can also set a language for the subtitles and the you turn on the unit for the first time. -
Page 12: Language
Display Mode LANGUAGE The Display Mode setting works only when the TV Aspect mode is set to 4:3. Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen. Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. -
Page 13: Audio
AUDIO DRC (Dynamic Range Control) With the DVD format, you can hear a programʼs Each DVD disc has a variety of audio output options. soundtrack in the most accurate and realistic Set the playerʼs AUDIO options according to the type presentation. -
Page 14: Operations
Operations General Features Buttons Operations Discs OPEN/CLOSE (Z) Opens or closes the disc tray. PAUSE/STEP (X) During playback, press PAUSE/STEP (X) to pause playback. Press PAUSE/STEP (X) repeatedly to play Frame-by- Frame. SKIP (. / >) During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. -
Page 15: Additional Features
Notes on general features: VCD 1.1 Last Scene Memory • On a Video CD with PBC, you must set PBC to Off This player memorizes last scene from the last disc on the setup menu to use the repeat function (See that is viewed. -
Page 16: Playing An Audio Cd Or Mp3/Wma File
Playing an Audio CD or ID3 TAG When playing a file containing information such as MP3/WMA file track titles, you can see the information by pressing DISPLAY. [ Title, Artist, Album, Year, Comment ] This unit can play Audio CDs or MP3/WMA files. Tips: MP3/ WMA/ Audio CD •... -
Page 17: Programmed Playback
Programmed Playback Repeat Programmed Tracks Press REPEAT to select a desired repeat mode. The program function enables you to store your • Track: Repeats the current track. favorite tracks from any disc in the player memory. • All: Repeats all the tracks on programmed list. A program can contain 30 tracks. -
Page 18: Viewing A Jpeg File
Viewing a JPEG file Moving to another file Press SKIP (. or >) or cursor (b or B) once This unit can play JPEG files. during viewing a picture to advance to the next or 1. Insert a JPEG files recording media. previous file. -
Page 19: Playing A Dvd Vr Format Disc
Playing a DVD VR format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The DVD-VR menu appears on the TV screen 2. Press v / V to select a title then press PLAY (N) or ENTER and playback starts. -
Page 20: Reference
Remote Control C1/C2/C3 Code Switching C1 or C2 code, the remote control code is set to C3 This unit is initially set to C3 code (JVC DVD automatically. In this case, you should reset the PLAYER code). You can easily change the remote control code described above. -
Page 21: Language Codes
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373 Afar 6565 Finnish 7073 Lithuanian 7684... -
Page 22: Troubleshooting
Troubleshooting Symptom Possible Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but • No disc is inserted. • Insert a disc. (Check the disc indicator the DVD player does in the display window is lit.) not work. -
Page 23: Specifications
Specifications General Power requirements: AC 120 V, 60 Hz Power consumption: Dimensions (Approx.): 430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot Net weight (Approx.): 1.5 kg (3.3 lbs) Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) Operating humidity: 5 % to 90 %... -
Page 24: Warranty (Only In U.s.a.)
Warranty (Only in U.S.A.) - Page 25 0208KMMLGEEGL P/N: MFL47214201...
- Page 26 DVD PLAYER XV-N370B XV-N372S INSTRUCTIONS LVT1874-003A...
- Page 27 CAUTION: The apparatus should not be exposed to water CAUTION (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. RISK OF ELECTRIC SHOCK DO NOT OPEN FCC WARNING: This equipment may generate or use CAUTION: TO REDUCE THE RISK radio frequency energy.
- Page 28 IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
- Page 29 Contents Introduction ....5-8 Operation ....14-19 General Features ..... .14 About the Symbol Display .
-
Page 30: Introduction
Introduction To ensure proper use of this product, please read this Notes on Discs owner’s manual carefully and retain it for future reference. Handling Discs This manual provides information on the operation Do not touch the playback side of the disc. Hold the and maintenance of your DVD player. -
Page 31: Types Of Playable Discs
Types of Playable Discs Regional Code This unit has a regional code printed on the rear of the (8 cm / 12 cm disc) unit. This unit can play only DVD discs labeled as the same as the rear of the unit or “ALL”. Video CD (VCD/SVCD) (8 cm / 12 cm disc) Notes on Regional Codes... -
Page 32: Front Panel
Front Panel a 1 1 / / ' ' STANDBY/ON f N (PLAY) Switches the unit ON and OFF. Starts playback. b Disc Tray g x (STOP) Insert a disc here. Stops playback. c Z (OPEN/CLOSE) h . (SKIP) Opens or closes the disc tray. Returns to the beginning of current chapter or track or go to the previous chapter or track. -
Page 33: Remote Control
Remote Control DISPLAY STANDBY/ON (1 1 / / ' ' ) Accesses On-Screen Display. Switches DVD Player ON and OFF. DVD MENU OPEN/CLOSE (Z) Accesses menu on a DVD disc. Opens and closes the disc tray. b / B / v / V (left/right/up/down) Selects an item in the menu. -
Page 34: Installation And Setup
Installation and Setup Setting up the Player Video and Audio Connections to Your TV The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, Make one of the following connections, depending on position the player away from the TV, VCR, or radio, the capabilities of your TV. -
Page 35: Audio Connection To Optional Equipment
Audio Connection to Optional Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro Logic: Connect the left Equipment and right AUDIO OUTPUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A). -
Page 36: When You Turn On For The First Time
When you turn on for the first Initial Settings time By using the Setup menu, you can make various adjustments to items such as picture and sound. The menu for a language selection will appear when You can also set a language for the subtitles and the you turn on the unit for the first time. -
Page 37: Language
Display Mode LANGUAGE The Display Mode setting works only when the TV Aspect mode is set to 4:3. Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen. Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. -
Page 38: Audio
AUDIO DRC (Dynamic Range Control) With the DVD format, you can hear a program’s Each DVD disc has a variety of audio output options. soundtrack in the most accurate and realistic Set the player’s AUDIO options according to the type presentation. -
Page 39: Operation
Operation General Features Buttons Operations Discs OPEN/CLOSE (Z) Opens or closes the disc tray. PAUSE/STEP (X) During playback, press PAUSE/STEP (X) to pause playback. Press PAUSE/STEP (X) repeatedly to play Frame-by- Frame. SKIP (. / >) During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. -
Page 40: Additional Features
Notes on general features: VCD 1.1 Last Scene Memory • On a Video CD with PBC, you must set PBC to Off This player memorizes last scene from the last disc on the setup menu to use the repeat function (See that is viewed. -
Page 41: Playing An Audio Cd Or Mp3/Wma File
Playing an Audio CD or ID3 TAG When playing a file containing information such as MP3/WMA file track titles, you can see the information by pressing DISPLAY. This unit can play Audio CDs or MP3/WMA files. [ TITLE, ARTIST, ALBUM, YEAR, COMMENT ] Tips: MP3/ WMA/ Audio CD •... -
Page 42: Programmed Playback
Programmed Playback Repeat Programmed Tracks Press REPEAT to select a desired repeat mode. The program function enables you to store your • TRACK: Repeats the current track. favorite tracks from any disc in the player memory. • ALL: Repeats all the tracks on programmed list. A program can contain 30 tracks. -
Page 43: Viewing A Jpeg File
Viewing a JPEG file Moving to another file Press SKIP (. or >) or cursor (b or B) once This unit can play JPEG files. during viewing a picture to advance to the next or 1. Insert a JPEG files recording media. previous file. -
Page 44: Playing A Dvd Vr Format Disc
Playing a DVD VR format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The DVD-VR menu appears on the TV screen 2. Press v / V to select a title then press PLAY (N) or ENTER and playback starts. -
Page 45: Reference
Remote Control C1/C2/C3 Code Switching C1 or C2 code, the remote control code is set to C3 This unit is initially set to C3 code (JVC DVD automatically. In this case, you should reset the PLAYER code). You can easily change the remote control code described above. -
Page 46: Language Codes
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373 Afar 6565 Finnish 7073 Lithuanian 7684... -
Page 47: Troubleshooting
Troubleshooting Possible Cause Correction Symptom • The power cord is disconnected. • Plug the power cord into the wall outlet No power. securely. The power is on, but • No disc is inserted. • Insert a disc. (Check the disc indicator in the display window is lit.) the DVD player does not work. -
Page 48: Specifications
Specifications General Power requirements: AC 120 V, 60 Hz Power consumption: Dimensions (Approx.): 430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot Net weight (Approx.): 1.5 kg (3.3 lbs) Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) Operating humidity: 5 % to 90 %... - Page 49 0408KMMLGEEGL P/N: MFL47214263...
- Page 50 DVD PLAYER XV-N370B XV-N372S INSTRUCTIONS LVT1874-002A...
- Page 51 Pay particular attention to plugs, wall outlets, Japan, Limited is: and the point where the cord exits the appliance. JVC Technical Services Europe GmbH To disconnect power from the mains, pull out the mains cord Postfach 10 05 04 plug.
-
Page 52: Safety Precautions
DO ensure that all electrical connections (including the mains cover. If the fuse fails again consult your nearest plug, extension leads and interconnections between JVC dealer. pieces of equipment) are properly made and in If nonetheless the mains plug is cut off remove the fuse accordance with the manufacturer’s instructions. - Page 53 Contents Introduction ....5-8 Operation ....14-19 General Features ..... .14 About the Symbol Display .
-
Page 54: Introduction
Introduction To ensure proper use of this product, please read this Notes on Discs owner’s manual carefully and retain it for future reference. Handling Discs This manual provides information on the operation Do not touch the playback side of the disc. Hold the and maintenance of your DVD player. -
Page 55: Types Of Playable Discs
Types of Playable Discs Regional Code This unit has a regional code printed on the rear of the (8 cm / 12 cm disc) unit. This unit can play only DVD discs labeled as the same as the rear of the unit or “ALL”. Video CD (VCD/SVCD) (8 cm / 12 cm disc) Notes on Regional Codes... -
Page 56: Front Panel
Front Panel a 1 1 / / ' ' STANDBY/ON f N (PLAY) Switches the unit ON and OFF. Starts playback. b Disc Tray g x (STOP) Insert a disc here. Stops playback. c Z (OPEN/CLOSE) h . (SKIP) Opens or closes the disc tray. Returns to the beginning of current chapter or track or go to the previous chapter or track. -
Page 57: Remote Control
Remote Control DISPLAY STANDBY/ON (1 1 / / ' ' ) Accesses On-Screen Display. Switches DVD Player ON and OFF. DVD MENU OPEN/CLOSE (Z) Accesses menu on a DVD disc. Opens and closes the disc tray. b / B / v / V (left/right/up/down) Selects an item in the menu. -
Page 58: Installation And Setup
Installation and Setup Setting up the Player Video and Audio Connections to Your TV The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, Make one of the following connections, depending on position the player away from the TV, VCR, or radio, the capabilities of your TV. -
Page 59: Audio Connection To Optional Equipment
Audio Connection to Optional Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro Logic: Connect the left Equipment and right AUDIO OUTPUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A). -
Page 60: When You Turn On For The First Time
When you turn on for the first Initial Settings time By using the Setup menu, you can make various adjustments to items such as picture and sound. The menu for a language selection will appear when You can also set a language for the subtitles and the you turn on the unit for the first time. -
Page 61: Language
Display Mode LANGUAGE The Display Mode setting works only when the TV Aspect mode is set to 4:3. Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen. Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. -
Page 62: Audio
AUDIO DRC (Dynamic Range Control) With the DVD format, you can hear a program’s Each DVD disc has a variety of audio output options. soundtrack in the most accurate and realistic Set the player’s AUDIO options according to the type presentation. -
Page 63: Operation
Operation General Features Buttons Operations Discs OPEN/CLOSE (Z) Opens or closes the disc tray. PAUSE/STEP (X) During playback, press PAUSE/STEP (X) to pause playback. Press PAUSE/STEP (X) repeatedly to play Frame-by- Frame. SKIP (. / >) During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. -
Page 64: Additional Features
Notes on general features: VCD 1.1 Last Scene Memory • On a Video CD with PBC, you must set PBC to Off This player memorizes last scene from the last disc on the setup menu to use the repeat function (See that is viewed. -
Page 65: Playing An Audio Cd Or Mp3/Wma File
Playing an Audio CD or ID3 TAG When playing a file containing information such as MP3/WMA file track titles, you can see the information by pressing DISPLAY. [ TITLE, ARTIST, ALBUM, YEAR, This unit can play Audio CDs or MP3/WMA files. COMMENT ] MP3/ WMA/ Audio CD Tips:... -
Page 66: Programmed Playback
Programmed Playback Repeat Programmed Tracks Press REPEAT to select a desired repeat mode. The program function enables you to store your • TRACK: Repeats the current track. favorite tracks from any disc in the player memory. • ALL: Repeats all the tracks on programmed list. A program can contain 30 tracks. -
Page 67: Viewing A Jpeg File
Viewing a JPEG file Moving to another file Press SKIP (. or >) or cursor (b or B) once This unit can play JPEG files. during viewing a picture to advance to the next or 1. Insert a JPEG files recording media. previous file. -
Page 68: Playing A Dvd Vr Format Disc
Playing a DVD VR format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The DVD-VR menu appears on the TV screen 2. Press v / V to select a title then press PLAY (N) or ENTER and playback starts. -
Page 69: Reference
Remote Control C1/C2/C3 Code Switching C1 or C2 code, the remote control code is set to C3 This unit is initially set to C3 code (JVC DVD automatically. In this case, you should reset the PLAYER code). You can easily change the remote control code described above. -
Page 70: Language Codes
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373 Afar 6565 Finnish 7073 Lithuanian 7684... -
Page 71: Troubleshooting
Troubleshooting Possible Cause Correction Symptom • The power cord is disconnected. • Plug the power cord into the wall outlet No power. securely. The power is on, but • No disc is inserted. • Insert a disc. (Check the disc indicator in the display window is lit.) the DVD player does not work. -
Page 72: Specifications
Specifications General Power requirements: AC 220-240 V, 50/60 Hz Power consumption: Dimensions (Approx.): 430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot Net weight (Approx.): 1.5 kg (3.3 lbs) Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) Operating humidity: 5 % to 90 %... - Page 73 0408KMMLGEEGL P/N: MFL47214248...
- Page 74 DVD PLAYER XV-N370B XV-N372S INSTRUCTIONS LVT1874-019A [US]...
- Page 75 CAUTION: CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK • The STANDBY/ON button does not completely shut off DO NOT REMOVE COVER (OR BACK) mains power from the unit, but switches operating NO USER-SERVICEABLE PARTS INSIDE current on and off. REFER SERVICING TO QUALIFIED SERVICE •...
- Page 76 Contents Introduction ....4-7 Operation ....13-18 General Features ..... .13 About the Symbol Display .
-
Page 77: Introduction
Introduction To ensure proper use of this product, please read this Notes on Discs owner’s manual carefully and retain it for future reference. Handling Discs This manual provides information on the operation Do not touch the playback side of the disc. Hold the and maintenance of your DVD player. -
Page 78: Types Of Playable Discs
Types of Playable Discs Regional Code This unit has a regional code printed on the rear of the (8 cm / 12 cm disc) unit. This unit can play only DVD discs labeled as the same as the rear of the unit or “ALL”. Video CD (VCD/SVCD) (8 cm / 12 cm disc) Notes on Regional Codes... -
Page 79: Front Panel
Front Panel a 1 1 / / ' ' STANDBY/ON f N (PLAY) Switches the unit ON and OFF. Starts playback. b Disc Tray g x (STOP) Insert a disc here. Stops playback. c Z (OPEN/CLOSE) h . (SKIP) Opens or closes the disc tray. Returns to the beginning of current chapter or track or go to the previous chapter or track. -
Page 80: Remote Control
Remote Control DISPLAY STANDBY/ON (1 1 / / ' ' ) Accesses On-Screen Display. Switches DVD Player ON and OFF. DVD MENU OPEN/CLOSE (Z) Accesses menu on a DVD disc. Opens and closes the disc tray. b / B / v / V (left/right/up/down) Selects an item in the menu. -
Page 81: Installation And Setup
Installation and Setup Setting up the Player Video and Audio Connections to Your TV The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, Make one of the following connections, depending on position the player away from the TV, VCR, or radio, the capabilities of your TV. -
Page 82: Audio Connection To Optional Equipment
Audio Connection to Optional Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro Logic: Connect the left Equipment and right AUDIO OUTPUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A). -
Page 83: When You Turn On For The First Time
When you turn on for the first Initial Settings time By using the Setup menu, you can make various adjustments to items such as picture and sound. The menu for a language selection will appear when You can also set a language for the subtitles and the you turn on the unit for the first time. -
Page 84: Language
Display Mode LANGUAGE The Display Mode setting works only when the TV Aspect mode is set to 4:3. Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen. Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. -
Page 85: Audio
AUDIO OTHERS Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to Dolby Digital / DTS / MPEG the PBC. -
Page 86: Operation
Operation General Features Discs Buttons Operations OPEN/CLOSE (Z) Opens or closes the disc tray. PAUSE/STEP (X) During playback, press PAUSE/STEP (X) to pause playback. Press PAUSE/STEP (X) repeatedly to play Frame-by- Frame. SKIP (. / >) During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. -
Page 87: Additional Features
Notes on general features: VCD 1.1 Last Scene Memory • On a Video CD with PBC, you must set PBC to Off This player memorizes last scene from the last disc on the setup menu to use the repeat function (See that is viewed. -
Page 88: Playing An Audio Cd Or Mp3/Wma File
ID3 TAG Playing an Audio CD or When playing a file containing information such as MP3/WMA file track titles, you can see the information by pressing DISPLAY. [ TITLE, ARTIST, ALBUM, YEAR, This unit can play Audio CDs or MP3/WMA files. COMMENT ] MP3/ WMA/ Audio CD Tips:... -
Page 89: Programmed Playback
Repeat Programmed Tracks Programmed Playback Press REPEAT to select a desired repeat mode. The program function enables you to store your • TRACK: Repeats the current track. favorite tracks from any disc in the player memory. A program can contain 30 tracks. •... -
Page 90: Viewing A Jpeg File
Viewing a JPEG file Moving to another file Press SKIP (. or >) or cursor (b or B) once This unit can play JPEG files. during viewing a picture to advance to the next or 1. Insert a JPEG files recording media. previous file. -
Page 91: Playing A Dvd Vr Format Disc
Playing a DVD VR format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The DVD-VR menu appears on the TV screen 2. Press v / V to select a title then press PLAY (N) or ENTER and playback starts. -
Page 92: Reference
Remote Control C1/C2/C3 Code Switching C1 or C2 code, the remote control code is set to C3 This unit is initially set to C3 code (JVC DVD automatically. In this case, you should reset the PLAYER code). You can easily change the remote control code described above. -
Page 93: Language Codes
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373 Afar 6565 Finnish 7073 Lithuanian 7684... -
Page 94: Troubleshooting
Troubleshooting Symptom Possible Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. • No disc is inserted. • Insert a disc. (Check the disc indicator The power is on, but the DVD player does in the display window is lit.) not work. - Page 95 Specifications General Power requirements: AC 110-240 V, 50/60 Hz Power consumption: Dimensions (Approx.): 430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot Net weight (Approx.): 1.5 kg (3.3 lbs) Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) Operating humidity: 5 % to 90 %...
- Page 96 MEMO...
- Page 97 0408KMMLGEEGL P/N: MFL47214265...