Load up to:
25 greeting cards, index cards, postcards, or photo cards
25 sheets of photo/glossy paper
10 iron-on transfers
50 transparencies
Saving paper default settings
You can set the default paper size, paper type, and photo print size for the documents and photos that you print.
Note: These default settings apply only to print, copy, and scan jobs that you initiate from the printer.
1
From the printer control panel, press
2
Choose the default settings:
•
If you want to set the default paper size:
a
Press
to select Paper Setup.
b
Press the arrow buttons to scroll to Paper Size, and then press
c
Press the arrow buttons to select the default paper size for the printer, and then press
•
If you want to set the default paper type:
a
Press
to select Paper Setup.
b
Press the arrow buttons to scroll to Paper Type, and then press
c
Press the arrow buttons to select the default paper type for the printer, and then press
Make sure that:
Note: Draft mode is available but is not recommended for
1
use with expensive paper such as heavyweight matte, labels,
photo cards and glossy paper.
2
Note: Draft mode is available but is not recommended for
use with expensive paper such as heavyweight matte, labels,
photo cards and glossy paper.
.
Loading paper and original documents
28
•
The print side of the card is faceup.
•
The paper guides rest against the edges of the cards.
•
You select Automatic, Normal, or Photo print quality.
•
The print side of the paper is faceup.
•
The paper guides rest against the edges of the paper.
•
You select Automatic, Normal, or Photo print quality.
•
You follow the loading instructions on the iron-on
transfer packaging.
•
The print side of the transfer is faceup.
•
The paper guides rest against the edges of the transfer.
•
You select Automatic, Normal, or Photo print quality.
•
The rough side of the transparencies is faceup.
•
The paper guides rest against the edges of the
transparencies.
.
.
.
.