Product Record; Serial Plate Location; Grounding Instructions; Liquefied Petroleum (Propane) Gas Conversion - Kenmore 3050 - Pro 36 in. Gas Slide-In Cooktop Use And Care Manual

Use and care guide
Hide thumbs Also See for 3050 - Pro 36 in. Gas Slide-In Cooktop:
Table of Contents

Advertisement

Product Record
In this space below, record the date of purchase, model
and serial number of your product. You will find the model
and serial number printed on the serial plate. This serial
plate is located under the cooktop. See bottom
of this
page for the serial plate location.
Model No. 790.
Serial Plate Location
You will find the model and serial number printed on the
serial plate. The serial plate is located under the cooktop.
Please see the illustration for exact location. Remember to
record the serial number for future reference (See Product
Record above).
Serial No.
Date of purchase
Save these instructions and your sales receipt for future
reference.
Serial plate is
located under
the burner box.
Grounding Instructions
For personal safety, the cooktop must be properly grounded. For maximum
safety, the power cord must be plugged into an electrical outlet that is
correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension
cord. If a 2-prong wall receptacle
is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a properly
grounded 3-prong wall receptacle installed by a qualified electrician.
See the INSTALLATION
INSTRUCTIONS packaged with this cooktop for
complete installation and grounding instructions.
Grounding
type wall
receptacl,
pply cord with
3-prong grounding plug
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove
the grounding prong from this plug.
Avoid fire hazard or electrical shock.
DO NOT use an adapter plug, an extension cord, or
remove grounding prong from electrical power cord.
Failure to follow this warning
can cause serious
injury, fire or death.
Liquefied Petroleum (Propane)
Gas Conversion
This appliance can be used with Natural Gas or Propane (L.P.)
Gas. It is shipped from the factory for use with Natural Gas.
If you wish to covert the appliance to LP Gas, use the supplied LP
Gas conversion kit and instructions, contained in an envelope
marked FOR LP/PROPANE
GAS CONVERSION.
The conversion
must be performed by a Sears or other qualified
LP service
dealer following
the supplied instructions.
To avoid serious injury or death, any
additions, changes or conversions required for this
appliance to operate with either LP or Natural Gas
must be made bya Sears or other qualified LP service
dealer.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3101 - pro 36 in gas dropPro 790.3050

Table of Contents