Installing Your Computer In An Enclosure - Dell OptiPlex DCCY Setup And Quick Reference Manual

Removing the Cable Cover
1 If a security device is installed in the security cable slot, remove the device.
2 Slide the release button, grasp the cable cover, and slide the cover sideways
as shown until it stops, and then lift the cable cover up and away.

Installing Your Computer in an Enclosure

Installing your computer in an enclosure can restrict the airflow and impact
your computer's performance, possibly causing it to overheat. Follow the
guidelines below when installing your computer in an enclosure.
CAUTION:
instructions that shipped with your computer.
NOTICE:
The operating temperature specifications indicated in this document
reflects the maximum ambient operating temperature. The room ambient
temperature needs to be a consideration when you install your computer in an
enclosure. For example, if the ambient room temperature is at 25°C (77°F),
depending on your computer's specifications, you only have 5° to 10°C (9° to 18°F)
temperature margin before you reach your computer's maximum operating
temperature. For details about your computer's specifications, see "Specifications"
on page 35.
26
Setting Up Your Computer
release button
1
Before installing your computer in an enclosure, read the safety
1