General Operation - VDO CD 1604 MP3 User Manual

GENERAL OPERATION

ON / OFF
Switch on the unit by pressing button (3)
when system is on, press POWER
button (3) to turn off the unit.
FACEPLATE RELEASE
Press REL button (1) To flip down panel and
take out the panel follow as figure 1.0.
SOUND ADJUSTMENT
Press SOUND button (22) to select the
desired adjustment mode. The adjustment
mode will change in the following order:
Volume DSP
Bass Boost
By turning AUDIO ADJUST button (2),
different setting levels can be adjusted.
Note: Bass/Treble selections are only
active when the DSP (Digital Sound
Processor) is switched off.
Item Range of adjustment
OFF FLAT
DSP
0
Volume
-10
Bass
-10
Treble
-10
Balance
-10
Fader
OFF BB 1
Bass Boost
Press SOUND button (22) for 2 seconds,
it will trigger a series of advanced RDS
settings.
Refer to RDS (radio data system)
operation section for details.
A/. DSP mode
Press SOUND button (22) to turn on sound
DSP function (Digital Sound Processor)
and to select desired audio mode.
There are five kinds of mode as below:
8
Bass Treble
Fader Balance
CLASSIC POP ROCK
0
0
0
0
BB 2 BB 3
FLAT
Activating the DSP overrides the prior
selected Bass/Treble settings.
B/. Bass Boost mode
Activate Bass Boost mode by SOUND
button (22) and select desired Bass
Boost effect as rotate Volume button (2).
There are four kinds of mode as below:
OFF
FLASHING LED
If the front panel is removed from the unit,
the LED (24) will be flashing.
RESET
RESET button (25) is placed on the front
panel and must be activated with either a
ball point pen or thin hard object.
The RESET button (25) is to be activated for
the following reasons:
- All the function buttons do not operate.
- Error symbol on the display.
100
Note: Pressing the RESET button (25) will
+ 10
erase your stored stations in the memory.
+ 10
SOURCE
+ 10
Press button (12) to switch between CD
+ 10
and Radio.
MUTE
Press volume button (2) to silence the
receiver. Press it again to resume
listening.
CLASSIC POP ROCK
BB1 BB2
DSP OFF
BB3