Using The Detached Panel - VDO CD 1604 MP3 User Manual

Hide thumbs Also See for CD 1604 MP3:
Table of Contents

Advertisement

DIN FRONT-MOUNT (Method A)
Installation of the unit
1. Metal Sleeve
Install the metal sleeve in the
dashboard.
For optimal performance of the CD
player, the metal sleeve should be
positioned horizontally (between -10
and +30). Fix metal sleeve into place
by pressing the metal tags outwards
using screwdriver.
2. Front Mounting
Slide the radio into the metal sleeve
until the springs at either side of the
radio snap into the openings of the
sleeve.
3. Removing Radio
Insert the levers supplied with the unit
into the grooves at both sides of the
unit until they lock. Pull the levers
toward you makes it possible to
remove the unit from the dashboard.
JIN REAR-MOUNT (Method B)
Installation using the screw holes on the
sides of the unit.
6
Remove the outer rim around the front
panel and the side springs. Select a
position where the screw holes of the
mounting bracket and the screw holes of
the radio become aligned and tighten the
screws at 2 places on each side.

USING THE DETACHED PANEL

See details at the back of the cover page
for remove (figure A) and install (figure B)
the front panel.
1. Press the release button and pull-off
the front panel. Keep front panel into
the case.
2. To install the front panel, insert the
panel into the housing and make
sure the panel is properly installed,
otherwise, abnormalities occurs on
the display or some keys will not
function properly.
SECURITY IDENTIFICATION NUMBER
A security identification number is
stated on the "Security Card".
Show this card as a proof of ownership,
when the set is stolen, when the
detachable Front is lost or when
requesting service.
Do not keep the "Security Card" in your
car.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents