Specifications; Bedienungsanleitung - Vivanco UR 89 UNIVERSAL CONTROLLER Manual

UR 89 Universal Controller
1. Switch on the appliance to be controlled.
A channel number, for example, appears in the
display of your satellite receiver.
2. To start the code search, press the SET
button, bottom right, and then additionally the
required appliance button, e.g. TV, for more
than 3 seconds until the lamp (LED) starts to
blink.
3. Then point the remote control at the
appliance to be controlled while the remote
control emits a different ON/OFF signal every 2
seconds.
4. When your appliance reacts, press any
button, except SET, to end the search. – If you
ended the search too late, continue to search
using the Manual Code Search (see above).
Finally, test the control code setting by
5.
trying to control, for example, your DVD
appliance. If it does not work correctly, please
try the code search again. The code search
then begins with the next code in the sequence.
- Remember to switch your appliance, e.g.
DVD, back on again if you wish to continue
searching.
Code identification
You can read off the 3-digit codes you have set
at any time:
1. Press the appliance
appliance whose code you want to read off, e.g.
TV.
2. Press the SET button
depending on the part of the code you want to
read off. For example, if you press SET+1 after
TV and the code 154 (in this example) has
been set, the lamp blinks once after SET+1 is
released to show that the hundred figure is 1.
All you have to do is count. The ten figure is
indicated after SET+2 is released, e.g. it blinks
5 times for the 5 in 154. The one figure is
indicated after SET+3 is released, e.g. it blinks
4 times for the 4 in 154. - We recommend that
you note the found codes, for example, on a
label attached to the back of the remote control.
Operation
You operate your appliances basically in
exactly the same way as if you were using the
original remote controls, except that you must
first press an appliance button (TV, DVD, etc.)
to control the required appliance. As the
symbols on the UR 89 could differ from those
on the original remote controls you may have to
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail:
try out all the buttons in order to find the
functions.
Special settings and functions
1. Volume Punch-Through function: To
simplify operation, the volume buttons (VOL+ or
VOL-) and the Mute
the last appliance used for volume control if the
appliance currently selected does not have
volume control in its control code. Example:
you are controlling TV at first, then you change
to DVD, which has no volume control. The
remote control then automatically controls the
TV volume without you having to switch over to
TV in between.
2. Assigning
exclusively to one appliance: Press the
appliance button of the appliance that you
always want to use for volume control, e.g.
AMP if that is where you have set your AV
receiver. To lock, press SET and 5. To unlock,
press SET and 6.

Specifications

Batteries: 2x AAA batteries, R03, UM4
Range: max. 7 m
Not for 400 kHz equipment
2-year works guarantee
button of the Should your UR 89 cease to work within 2
years of purchasing you will receive a free
replacement from Vivanco. Exceptions: missing
and 1,2,3, codes, deliberate destruction and normal wear
and tear of the housing and buttons.
Fernbedienung Vivanco UR 89 für fast alle
Fernseh-, Audio-, Video und anderen
Batterien einlegen
Bitte öffnen Sie die Batterieklappe an der
Geräterückseite, Lasche leicht nach oben
drücken,
Mikrozellenbatterien ein. Achten Sie auf die
angegebenen Polaritäten auf Batterien und im
Batteriefach (+=+), und schließen Sie das Fach
wieder vorsichtig. – Bitte achten Sie darauf,
immer einwandfreie Batterien zu verwenden.
Geräteanpassung
Um Ihre Ger te steuern zu können, müssen Sie
die Fernbedienung für Ihre Ger te einstellen.
Dazu gibt es zwei Möglichkeiten: die direkte
button always control
volume and
(D) Bedienungsanleitung
infrarotsteuerbaren Geräte
und legen Sie 2
hotline@vivanco.de 2
mute
Alkali-