3. Setting up
3.1
3.2
3.3
Note: AUX port is used for Remote Handset Lifter (RHL). Please refer to Appendix.
4
If your telephone has a headset port,
go directly to 3.2b.
3.1 Unplug handset cord from your
telephone and connect to the port on
base unit marked
with
.
3.2a Connect enclosed telephone
cord to the now empty handset port
on telephone, and to the port on base
unit marked with
.
3.2b (Headset port use only)
Connect enclosed telephone cord
to the headset port on telephone,
and to the port on base unit marked
with
.
3.3 Connect AC power adapter to
port on bottom of base unit, then
connect to AC power outlet. Visual
indicator on base will light green.