Jabra HHC ADAPTER - DATASHEET CISCO Datasheet

JABRA HHC
AdApteR
Headset HookswitcH control
for cisco Unified iP PHones.
The Jabra 14201-16 HHC Adapter enables remote Headset
Hookswitch Control (HHC*) with Jabra wireless headsets and
the latest generation of Cisco Unified IP Phones.
This means that users can hear ring tones, answer and end
calls, adjust the volume or even mute the call up to 350 ft.
away from their desks. The integration of handset and headset
allows users to benefit from enhanced mobility and the ability
to multitask while on a call. The wireless freedom improves
work efficiency and ergonomics throughout the day.
How it works
The HHC Adapter is a plug-and-play solution that converts from
the HHC standard used in Cisco phones to the DHSG standard
used in Jabra headsets – and vice versa.
Handset - Headset compatibility
The HHC Adapter is compatible with the new suite of Cisco
Unified IP Phones released September 2007: 7942G, 7945G,
7962G, 7965G and 7975G. Cisco Unified IP Phone release 8.3(3)
will enable the HHC functionality.
For more details see www.jabra.com/cisco.
* HHC requires Cisco Unified Communications Manager 4.1(3) or
above plus the 8.3(3) phone firmware load.
JABRA ® is A RegisteRed tRAdemARk of gN NetCom A/s
www.JABRA.Com
The HHC Adapter can be used with the
following Jabra wireless office headsets:
Jabra Gn9350/Jabra Gn9350e
Wireless dual-function** headset that enables
users to switch between PC-based VoIP and a
desk phone. It offers conference call capability,
up to 350 ft range, three wearing styles, up
to 9 hours talk time plus optional battery for
'around-the-clock' talk time.
Jabra Gn9120 eHs
Award-winning wireless headset offering
up to 300 ft range, three wearing styles,
conference call capability and up to 8 hours
talk time.
Jabra Gn9120 dUo eHs
Dual speaker version of Jabra GN9120 EHS
optimized for noisy open office environments.
dAtAsHeet