Dimension Switch ES-2008 : Device Information
========================
Device Name : ES-2008
Device Contact :
Device Location : 2F RM105
Device Description : Ethernet Switch
actions->
Tab=Next Item
BackSpace=Previous Item
To move to the configuration menu, press [TAB] to select <Edit> in the actions menu and
press [ENTER]. The following table describes the fields in this menu.
FIELD
Device Name
Device Contact
Device Location
Device
Description
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
14.2.2 Ethernet IP Configuration
Use the IP Configuration screen to change the TCP/IP settings of the switch.
Step 1.
In the Administration Configuration screen, press [TAB] to select IP
Configuration and press [ENTER].
Basic System Setup
<Edit>
Select the action menu.
Figure 14-3 SMT: Device Information
Table 14-2 SMT: Device Information
Enter a descriptive name for identification purposes.
Enter the name of the person in charge of this device.
Enter the location of the switch for administrative
purposes.
Enter a short description of the switch for administrative
purposes.
Dimension ES-2008 Ethernet Switch
<Save>
Quit=Previous menu
DESCRIPTION
<Quit>
Enter=Select Item
EXAMPLE
ES-2008
2F RM105
Ethernet
Switch
14-3