Static Mac Address; Table 8-3 Igmp Snooping - ZyXEL Communications Dimension ES-2008 User Manual

Ethernet switch
Table of Contents

Advertisement

Dimension ES-2008 Ethernet Switch
FIELD
IP Address
VLAN ID
Member Port
8.2

Static MAC Address

You can add a MAC address to the MAC address table on the switch. A static MAC
address will remain in the MAC address table permanently even if the Ethernet device is
not connected to the switch.
With static MAC addresses, the switch avoids re-learning the MAC addresses of the
Ethernet devices every time the switch reboots or disconnects from the network.
8.2.1 Adding Static MAC Address
Follow the steps to add static MAC addresses.
Step 1.
Click Administrator and then Filter Setup.
Step 2.
Click the Static MAC Addresses tab to display the screen as shown in the
figure below.
8-6

Table 8-3 IGMP Snooping

This field displays the IP multicast address in the range 224.0.0.0
through 239.255.255.254.
This field displays the VLAN or multicast group ID.
This field displays the port number to which the Ethernet device is
connected.
DESCRIPTION
Filter and Security Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents