State Activity; Figure 7-3 Trunk State Activity; Table 7-3 Trunk State Activity - ZyXEL Communications Dimension ES-2008 User Manual

Dimension ES-2008 Ethernet Switch
FIELD
Port No This field displays the port number(s) belonging to a static trunk group.
7.4

State Activity

Ports in a dynamic trunk group can be in either active or passive state.
If a port is in active state, the port automatically sends LACP packets to negotiate a trunk
link configuration with another link aggregation port on the other side of the link.
If a port is in passive state, the port only responds to LACP packets but cannot negotiate a
trunk link configuration with another trunk port on the other end of the link.
Use the State Activity screen to set the state of the port(s) in a dynamic trunk group.
The following table describes the fields in this screen.
FIELD
Port This field displays the port numbers.
This field is N/A for ports not in a dynamic trunk group.
LACP State
Activity
Select the Status check box to set the port to active state.
If the Status check box is not selected, the port is set to passive state. This
is the default setting for all ports in a dynamic trunk group.
7-4
Table 7-2 Aggregator Information

Figure 7-3 Trunk State Activity

Table 7-3 Trunk State Activity

DESCRIPTION
DESCRIPTION
Port Trunking