Front Panel Leds; Table 2-1 Network Cable Types; Table 2-2 The Switch Power Led Description - ZyXEL Communications Dimension ES-2008 User Manual

Ethernet switch
Table of Contents

Advertisement

2.2.3 Network Cable Types
The following table describes the types of network cable used for the different connection
speeds. The fiber and gigabit ports are not available on all ES models.
Make sure the 10/100 Base-TX and/or 1000Base-T cable length
between connections does not exceed 100 meters (328 feet).
SPEED
10 Base-TX
100 Base-TX
1000BASE-T
100BASE-FX
(multi-mode)
100BASE-FX
(single-mode)
2.3

Front Panel LEDs

All the LEDs are found on the front panel of the switch to indicate real-time status of the
ports and the switch.
2.3.1 The PWR LED
The PWR LED on the front panel indicates whether the switch is receiving power.
LED
COLOR
Power
Green
2.3.2 10/100M Ethernet Port LEDs
The LEDs for the 10/100M Ethernet ports give real-time system information and status.
Hardware Description and Installation

Table 2-1 Network Cable Types

100Ω 2-pair UTP/STP Category 3, 4 or 5
100Ω 2-pair UTP/STP Category 5
100Ω 4-pair UTP/STP Category 5
50~62.5/125 micron multi-mode fiber-optics
8~10/125 micron single-mode fiber-optics

Table 2-2 The Switch Power LED Description

STATUS
On
Off
Dimension ES-2008 Ethernet Switch
NETWORK CABLE TYPE
DESCRIPTION
The switch is receiving power.
The switch is not receiving power.
2-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents