Figure 18-1 Smt: Startup Message; Figure 18-2 1K Xmodem Firmware Upload Example - ZyXEL Communications Dimension ES-2008 User Manual

Ethernet switch
Table of Contents

Advertisement

Dimension ES-2008 Ethernet Switch
18.2.1 Firmware Upgrade Via Console Port
Connect your computer to the console port on the switch.
Step 1.
Run a terminal emulation program (Hyper Terminal in Windows screen shots
are used in this User's Guide) and configure its communication parameters.
Refer to the section on Accessing the SMT Using the Console Port.
Step 2.
Reboot the switch. The following screen displays.
$$$ Switch LOADER Checksum O.K !!!
$$$ Press X key to
$$$ Download IMAGE through console(1K Xmodem;baudrate=57600bps)
$$$ Start Xmodem Receiver:
Step 3.
At the "$$$ Press X key to start Xmodem receiver:"
message, press "x".
Step 4.
You must change your terminal emulation program console port baud rate
setting to 57600bps.
Step 5.
Click Transfer, then Send File to display the following screen.

Figure 18-2 1K Xmodem Firmware Upload Example

18-2
start Xmodem receiver: Key = 78

Figure 18-1 SMT: Startup Message

Firmware and Configuration File Maintenance
Type the firmware's file location or
click Browse to look for it,
Choose the 1K Xmodem protocol.
Then click Send.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents