Dimension ES-2008 Ethernet Switch
Select Port Security and press [ENTER] to display the screen as shown next.
Dimension Switch ES-2008 : Port Security
========================
Port
-------------------------------
1.
2.
3.
4.
Trk1.
Trk2.
0.
0.
9.
actions->
Tab=Next Item
BackSpace=Previous Item
The following table describes the fields in this screen.
FIELD
Port
This read-only field displays the port number or the trunk group on the switch
Note: This field is 0 to indicate that a port is in a trunk group.
Enable
Press [SPACE BAR] and [ENTER] to select Enable to prevent the port from
Security
learning new MAC addresses.
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
15.6.2 MAC Address Time Out
To specify the time out period for inactive MAC addresses, select Aging Time Setting to
display the screen as shown next.
Enter a time interval between 300 and 765 (in seconds) in the MAC Age Interval (sec)
field. If you enter 0, the MAC addresses will never timeout.
15-14
Enable Security
(disable for MAC Learning)
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
<Edit>
Select the Action menu.
Figure 15-15 SMT: Port Security
Table 15-7 SMT: Port Security
<Save>
Quit=Previous menu
DESCRIPTION
<Quit>
Enter=Select Item
Switch Configuration