Summary of Contents for AKG WMS 40 - RMU 40RMU 60 MOUNTING
Page 1
AKG RACK MOUNT KITS FOR WIRELESS RECEIVERS 1. RMU 40 (7615H0604) for SR 40 Diversity Consists of short and long rack ear, coupling plates and screws. For mounting two SR 40 Diversity two RMU 40 are needed. Remove the rubber pads at the bottom of the receivers where they are attached together and use the coupling plate for linking the housings.
Page 2
2. RMU 60 (2455Z0052) for SR 40 , SR60/61 and SR80/81 (non diversity version only) This picture shows of which parts the RMU60 consists (2 Rack ears, 3 Coupling pieces, Blind panel, Set of screws) Correct positioning of rack ear and coupling piece. The blind panel is already fixed to the rack ear using screws, toothed washers and nut Page 2 of 3...
Page 3
RMU60 attached to a single SR80 receiver Finally fasten the securing screws after adding the washers ______________________________________________________________________ AKG Acoustics GmbH, A Harman International Company, Lemböckgasse 21-25, A-1230 Wien, Austria Phone: (+431) 86654-1519, Fax: (+431) 86654-1514, e-mail: service@akg.com Page 3 of 3...