Samsung SyncMaster 400P User Manual page 82

Add
Registered files
5. Socket : Supportable for SyncMaster 320PXn/400P(T)Xn/460PXn only
Socket
Nick Name
Address
Port
Connect
Add
(.txt) data) using the successfully established connection
information.
Load TEXT(.txt) data of the path set in the File Navigation, copy
the data to the server PC and save the data onto the DB.
=>In an original text (.txt) data file, "," and "LineFeed" are used
as delimeters between cells that are determined during the Multi
Screen edit operation.
A window that shows DB information.
You can register TEXT(.txt) data through Socket.
You can name the nick name of a TEXT(.txt) data to be registered
so that it can be used for load and edit operation. (If you register
with the same nick name, the existing data, which has been
registered with the nick name, is replaced with the new one.)
Set an IP address to be registered.
Set a Port to be registered.
Establish Socket connection using the registered nick name and
address. If the connection is successfully established, the (
button on the side is activated.
Copy TEXT(.txt) data that is transmitted through socket to the
server PC and save the data onto the DB.
=>Data is transferred through the Socket as packets separated by
the length prefixed scheme.
ex) CX12abcdefghabcd
Size in Default
Name
bytes Value
Protocol 1 C
Op
1 X
code
Size 16
Data Varies
=>In an original text (.txt) data file, "," and "LineFeed" are used
as delimeters between cells that are determined during the Multi
Screen edit operation.
Comment
The size of message in bytes not
including the header and size
fields.
It is written in ASCII character
code.
) Add