Samsung SyncMaster 400P User Manual page 43

Samsung syncmaster 400p: user guide
Hide thumbs Also See for SyncMaster 400P:
Table of Contents

Advertisement

Connecting to a Camcorder
1)
Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the
camcorder.
Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN
[L-AUDIO-R] on the LCD Display.
2)
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the
LCD Display.
3)
Select AV for the Camcorder connection using the Source button on the front of the LCD Display or on the
remote control.
4)
Then, start the Camcorders with a tape inserted.
Note
• The audio-video cables shown here are usually included with a Camcorder.
(If not, check your local electronics store.)
If your camcorder is stereo, you need to connect a set of two cables.
Connecting to a DTV Set Top Box
Note
• The connections for a typical Set Top Box are shown below.
1)
Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and
the AUDIO OUT jacks on the Set Top Box.
2)
Connect a Component cable between the BNC / COMPONENT IN - P
the P
, Y, P
jacks on the Set Top Box.
R
B
port on the LCD Display and
, Y, P
R
B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents