Samsung SyncMaster 400P User Manual page 150

Note
• Problems related to audio signals and their solutions are listed below.
Problems
No sound.
The sound level is too low.
The sound is too high or too
low.
Problems related to the Remote Control
Note
• Problems related to the remote control and their solutions are listed.
Problems
The remote control buttons
do not respond.
Problems related to MagicNet
Note
• Making a Bootable USB Flash Disk.
Problems
Making a Bootable USB Flash
Disk
Question
How can I change the
Solutions
Ensure that the audio cable is firmly connected to both the
audio-in port on your LCD Display and the audio-out port
on your sound card.
(Refer to the Connecting the LCD Display
Check the volume level.
Check the volume level.
If the volume is still too low after turning the control to its
maximum, check the volume control on the computer sound
card or software program.
Adjusts the Treble and Bass to the appropriate levels.
Solutions
Check the polarities (+/-) of the batteries.
Check if the batteries are empty.
Check if the power is on.
Check if the power cord is securely connected.
Check if a special fluorescent or neon lamp is on in the
vicinity.
Solutions
1. You can turn a common 512-MB or bigger USB storage
media into a bootable disk using a USB bootable disk
creation tool. (For example, the HP USB Disk Storage
Format Tool)
2. Copies the OS ghost image and executables to your USB
disk.
3. Enter the BIOS menu of your set by pressing the F2 key in
the BIOS logo screen. Then, enable the USB Boot First
option by selecting that option and pressing the Enter key in
the Boot menu.
4. Switch your set on while your USB disk is connected and
boot up in DOS mode.
5. Run C:\ghost.exe and choose Local → Partition → From
Image from the menu. Choose the ghost image to update
your USB disk with and choose the target disk.
6. When the ghost image update finishes, the set will be
rebooted automatically.
Answer
)
Q & A