Assign A Manufacturing Code To The Remote Control; Issue A Library Search For A Manufacturer Code - Pioneer Kuro KRP-500M Operating Instructions Manual

Flat panel display
Hide thumbs Also See for Kuro KRP-500M:
Table of Contents

Advertisement

Available languages

Available languages

Use Other Equipment With Your Flat Panel Display
To delete a learned code, overwrite it with a new code on the same button or follow the directions below.
1 ) Simultaneously press the EDIT/LEARN and 2 buttons to begin.
The selected mode indicator flashes when the remote control is ready to be programmed.
2 ) Press and hold MONITOR a for at least two seconds.
The remote control starts deleting all learned codes for selected modes. When completed, the mode
indicator blinks Off and the remote control returns to normal operation.
6.1.2

Assign a Manufacturing Code to the Remote Control

To assign a preset Manufacturing code to the panel's remote control,
follow the directions below (Manufacturing codes are listed in section
"9.1 Manufacturer Codes to Program into the Remote Control").
1 ) Press SELECT to choose the device to program.
2 ) Simultaneously press the EDIT and 1 buttons to begin.
The selected mode indicator flashes when the remote control is
ready to be programmed.
3 ) Use the number buttons to enter a manufacturer code.
When the indicator turns off, the code has been stored in the
remote control.
Factory default manufacture codes:
STB (Set-top Box): Pioneer (0329)
BDP/LD/DVD/DVR: Pioneer (2052)
VCR (VTR): Pioneer (0058)
6.1.3

Issue a Library Search for a Manufacturer Code

If the code for a particular device is unknown, cycle through the available
codes for a similar unit then sample some functions for that code.
To find a code that can control the unit, follow the steps below using
different codes to find the best match.
1 ) Press SELECT to choose the device to program.
2 ) Simultaneously press the EDIT and 3 buttons to begin.
The selected mode indicator flashes when the remote control is
ready to search the code library.
3 ) Sample a code using a SOURCE POWER, PLAY, 1 or CH+
command.
4 ) Use the up/down arrow (/) buttons to advance to the next code
if the sampled code fails to control the device.
Another option is to return to the previous code and repeat Step 3.
5 ) Press ENTER to lock in the code that properly operates the device.
All the available buttons for the selected mode are added when the
mode indicator flashes on for one second. The remote control then
returns to normal operation.
1
2
3
4
5
6
7
8
SUB
PIP
INPUT
SELECT
BDP
EDIT/LEARN
MONITOR
STB
LD
VCR
CBL
DVD
SAT
DVR
1
2
3
4
5
6
7
8
EXIT
USER MENU
SUB
PIP
TOP MENU
TOOLS
GUIDE
ENTER
HOME
MENU
RETURN
MENU
ON DEMAND
FAVORITE
DVD/HDD
SOURCE
RECEIVER
VOL
INPUT
SELECT
BDP
EDIT/LEARN
MONITOR
STB
LD
VCR
CBL
DVD
SAT
DVR
06
51
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krp 500m - 50" lcd flat panel display

Table of Contents