Setting Network Number (For Wireless Lan); [User] Settings; Setting Ip - Panasonic PT-F100NT Network Manual

Network/Security setting of the projector

Setting network number (for wireless LAN)

1
Select [WIRELESS LAN] at the network menu.
2
Select the number to be connected with the [
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT
ENTER
• Network number
Off, [S-MAP], [1]-[4], [USER1]-[USER3]
Selecting [OFF] disables the wireless LAN.

[USER] settings

You can configure more precise network settings, if you select from [USER1] to [USER3] (user) for [Wireless LAN] in the
network menu. For network settings, contact your network administrator.

Setting IP

How to display IP address setting menu
Press [WIRELESS LAN]→[USER1] - [USER3]→[ENTER] at the network menu.
WIRELESS DETAILED SETUP
USER1
NAME CHANGE
DHCP
IP ADDRESS
SUBNETMASK
RETURN
DEFAULT GATEWAY
SELECT
ENTER
DHCP :
※
ON: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF: If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS
[SUBNETMASK
※ "Glossary" (See page 71)
A wired LAN and wireless LAN cannot be used in the same segment.
WIRED LAN
S-MAP
WIRELESS LAN
NAME CHANGE
PASSWORD OFF
PASSWORD CHANGE
NETWORK STANDBY OFF
ON
NETWORK CONTROL
OFF
LIVE MODE CUT IN
COMPUTER SEARCH
MULTI-LIVE
STATUS
INITIALIZE
1/3
USER1
OFF
192.168. 11.100
255.255.255. 0
192.168. 11. 1
NEXT CANCEL
] and [DEFAULT GATEWAY
※
(cont.)
] buttons.
].
※
54
],
※