Multi Live Mode; Switching From One Style To Another - Panasonic PT-F100NT Network Manual

Various projection methods

Multi Live Mode

Switching from one style to another

Multi live mode has "4-screen multi style", "4-screen index style" and "16-screen index style".
How to operate
Press the [MULTI-LIVE] button of the remote control to change the style.
• 4-screen multi style (See page 37)
Set the projector to a full screen display. Assign an area of one quarter of the
projector screen to each of up to four computers, and project images on the
projector screen.
• 4-screen index style (See page 38)
Display the indexes (small screens) of up to four computer screens, and
make one of these screens an enlarged display. You can also temporarily
switch over to a full screen display.
• 16-screen index style (See page 40)
Display the indexes of up to 16 computer screens. You can also temporarily
switch over one of these screens to a full screen display.
• When the projector starts up, it resumes in the current style the last time the projector was turned off.
• When transferring to the Live mode, first select the 4-screen multi style, and then click [
• If you switch over to a 4-screen multi style when five or more computers are connected in a 16-screen index style, the
connections to the fifth and higher numbered computers will be nullified.
• You cannot use the "MULTI-LIVE" button on the remote control when in full screen display.
(cont.)
36
[MULTI-LIVE]
button
[MULTI-LIVE]
button
[MULTI-LIVE]
button
] on the computer.