Taking Pictures With Exposure Compensation; Auto Bracket - Panasonic Lumix DMC-TZ4 Operating Instructions Manual

Taking pictures with exposure
Corrects exposure when adequate exposure cannot be obtained (if difference between
brightness of object and background, etc.). Depending on the brightness, this may not be
possible in some cases.
t isplay 'EXPOSURE'
@Example of exposure compensation
©
Select a value
÷ Minus direction
'0' (no compensa ion)
@
Optimum exposure
"@ Plus direction
Under-exposed
@The compensation value is displayed on the
bottom-left of the screen. (_, etc.)
Takes 3 pictures in succession, changing the exposure. After exposure compensation, the
compensation value is as standard.
Display 'AUTO BRACKET'
_ Press several times
Select a value
'0' (no compensation)
@e.g. AUTO BRACKET with +1 EV
21/_ 0EVFirst picture
_ (Standard)
Second picture
- 1EV
(Darker)
i hird picture
+1 EV
(Brighter)
Value displayed after exposure compensation set
@Cannot be used with flash or when there is remaining capacity for only 2 more pictures.
@When 'AUTO BRACKET' is set, _ is displayed on the left of the screen.
@Canceled when the power is turned off.
@Burst setting is canceled when auto bracket is set.
VQT1P79
43