Installing Ddr Modules - MSI 865PE Neo2-P Platinum Edition User Manual

Ms-6728 (v2.x) atx mainboard
Table of Contents

Advertisement

MS-6728 ATX Mainboard
Please refer to the following table for detailed dual-channel DDR. Other
combination not listed below will function as single-channel DDR.
DIMM1 (Ch A) DIMM2 (Ch A) DIMM3 (Ch B) DIMM4 (Ch B)
128MB~1GB
128MB~1GB
128MB~1GB
128MB~1GB
MSI Reminds You...
Dual-channel DDR works ONLY in the 3 combinations listed in
the table above.

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The module
will only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then
push it in until the golden finger on the memory module is deeply inserted
in the socket.
MSI Reminds You...
You can barely see the golden finger if the module is properly
inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
2-8
128MB~1GB
128MB~1GB
128MB~1GB
128MB~1GB
Notch
Volt
System Density
256MB~2GB
256MB~2GB
512MB~4GB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

865pe neo2-pfisr865pe neo2-pfs865pe neo2-plsMs-6728

Table of Contents