MSI 865PE Neo2-P Platinum Edition User Manual page 14

Left-wing: Current system status
In the left sub-menu, you can configure the settings of FSB, Vcore,
Memory Voltage and AGP Voltage by clicking the radio button in front of each
item and make it available (the radio button will be lighted as yellow when
selected), use the "+" and "-" buttons to adjust, then click "OK" to apply the
changes. Then you can click Save to save the desired FSB you just configured.
Also you may click Auto to start testing the maximal CPU overclocking
value, The CPU FSB will automatically increase the testing value until the PC
reboots. Or you may click Default to restore the default values.
Right-wing: PC hardware status during real time operation
In the right sub-menu, you can configure the PC hardware status such as
CPU & system temperatures and fan speeds. You may use the scroll bars to
adjust each item, then click "OK" to apply the changes. The values you set for
the temperatures are the maximum thresholds for the system for warnings, and
the value for fan speeds are the minimum thresholds.
Top-side: User mode/Auto mode
Here you may adjust the CPU fan speed. If you choose User mode, you
may adjust the CPU fan speed in 8 different modes, from Low speed to High
speed.
OC Menu
The exclusive OC Menu is fully de-
veloped to support DDR400+ memory
modules. By comprehensive validation
of over 67 DDR400+ memory modules,
MSI concluded best parameters for
DRAM voltage, Vio and other BIOS
settings. You can select DDR433,
DDR450, DDR466 and DDR500 from
DRAM frequency in BIOS setting. Or
you can just click on OC Menu button
to configure in the OC Menu at
CoreCenter. OC Menu will adjust the
necessary parameters of voltage and
frequency simultaneously. The only
limitation was the margin of processor from overclocking.
Getting Started
1-7