Usb Interface Mode - Kyocera FS FS-1920 Operation Manual

USB Interface Mode

6
Press the ENTER key. A blinking question mark (?) appears.
>Parallel I/F
? Auto
7
Press the or
changes as shown below. Press the ENTER key.
Auto (default)
Normal
High Speed
Nibble (high)
8
Press the MENU key. The message display returns to Ready.
About USB interface, for details, see
1
Press the MENU key.
2
Press the or
interface names shown below appears, indicating the current
interface.
Parallel (default)
USB
Serial (when a serial interface board kit is installed)
Option (when a network interface card is installed)
3
Press the ENTER key. A blinking question mark (?) appears.
Interface
? Parallel
4
Press the or
Interface
? USB
5
Press the ENTER key.
6
Press the MENU key. The message display returns to Ready.
key to display the desired mode. The display
Appendix
key until Interface > appears. One of the
key until USB appears.
1-75
Interface
C.