Overriding A4 And Letter Size Difference - Kyocera FS FS-1920 Operation Manual

Paper Handling

Overriding A4 and Letter Size Difference

This selects whether to enable or disable the difference between A4 size
and Letter size. Under the default setting of Off, the paper size of the
paper source is matched to the paper size formatting the jobs. If these
differ, a corresponding error message is displayed. When this is set to On,
printing is performed even if the actual paper size differs from the paper
size formatting the jobs.
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the > key.
4
Press the or
>Override A4/LT
Off
5
Press the ENTER key. A blinking question mark (?) appears.
>Override A4/LT
? Off
6
Select On or Off using the
7
Press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
key repeatedly until Paper Handling > appears.
key repeatedly until >Override A4/LT appears.
or key.
1-40