Printer Setup Mode - Button Functions - Datamax M-Class Mark II M-4206 Operator's Manual

4.5 Printer Setup Mode - Button Functions

In 'Printer Setup' mode, the buttons control the setting of the printer's operational items such as media settings,
communications, and options as detailed below.
Notes: It is recommended that the Printer Setup Mode not be entered while in Peel Mode or with the optional Present Sensor
enabled. Depending on label size this can cause unpredictable results.
Printer and cutter faults are disabled during
If at any time you wish to discard your changes and revert back to the previous values, simply turn off power to the printer.
If you wish to restore Factory Defaults see Section 5.7.
To change Printer Setup:
M-4206
(Press and hold during power-up until the
PAUSE
Printer Setup Mode
Prints the 'Printer Setup Menu List', see section 4.5.1
PAUSE
(
Press and
FEED
Release
(
Press and
FEED
Hold
Prints the 'Test Label' for "test"
CANCEL
PAUSE
Saves the current values
+
and resumes
CANCEL
Printer Setup Procedure
Increments item's value
PAUSE
(
Press and
FEED
(
Press and
Decrements item's value
CANCEL
PAUSE
Accepts the current
+
values for "test"
CANCEL
, but can still occur while printing "test" labels.
)
Feeds one label for "test"
)
(Enters Printer Setup)
Normal Mode
(Current Item and Value is printed)
)
Selects the next menu item
Release
)
"Direct Select" menu item
Hold
eg. 7 Error light flashes = Baud Rate menu item #7
STOP light turns off)
19