D-Link DGS-1008P User Manual
8-port gigabit desktop switch with 4 poe ports
Hide thumbs
Also See for DGS-1008P:
- Quick installation manual (76 pages) ,
- User manual (21 pages) ,
- Quick install manual (8 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for D-Link DGS-1008P
Summary of Contents for D-Link DGS-1008P
- Page 2 FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications.
-
Page 3: Table Of Contents
Table of Contents D-Link Web Smart Switch User Manual Table of Contents Table of Contents ............................. i About This Guide............................. 2 Terms/Usage..............................2 Copyright and Trademarks ..........................2 Product Introduction ............................3 Product Outlook ............................. 3 Front Panel ..............................3 Rear Panel.............................. -
Page 4: About This Guide
This guide provides instructions to install the D-Link 8-port Gigabit Ethernet PoE Switch DGS-1008P. Terms/Usage In this guide, the term “Switch” (first letter capitalized) refers to the DGS-1008P, and “switch” (first letter lower case) refers to other Ethernet switches. Some technologies refer to terms “switch”, “bridge” and “switching hubs”... -
Page 5: Product Introduction
IEEE 802.3af Power over Ethernet The first 4 ports of the DGS-1008P support the IEEE 802.3af PoE protocol. Each of the 4 ports can supply 48V, up to 15.4 watts power to the IEEE 802.3af-compliant Powered Device (PD) directly. It minimizes the clutter of extra cables making the network deployment more easily especially when device are far from power outlets. -
Page 6: Rear Panel
10M or 100M. When the port LED glows in green, it is running on 1000Mbps. Rear Panel Figure 2 – DGS-1008P Rear Panel DC Power Jack: Connect to the power adapter. Power Switch: Use to turn on/off the Switch. -
Page 7: Hardware Installation
2 Hardware Installation D-Link Web Smart Switch User Manual Hardware Installation This chapter provides unpacking and installation information for the D-Link DGS-1008P. Step 1: Unpacking Open the shipping carton and carefully unpack the contents. Please consult the packing list located in the User Manual to make sure all items are present and undamaged. -
Page 8: Understanding The Switch Features
Understanding The Switch Features Cable Diagnostics DGS-1008P will scan all ports when device booting up. The diagnosis results will be displayed by port LED at the first 1 second after port scan finished. And following are the explanation of the result: Solid Green: A Gigabit connection is detected and the cable is good. - Page 9 3 Understanding The Switch Features D-Link Web Smart Switch User Manual Power Saving by Link Status: Drastically save power when the switch port link is down. For example, when there are no PC connections or the connected PC is powered off.
-
Page 10: Appendix A - Technical Specifications
Appendix A - Technical Specifications D-Link Web Smart Switch User Manual Appendix A - Technical Specifications Total PoE budget: 52 watts, average 13 Hardware Specifications watts per PoE port. Key Components / Performance Switching Capacity: 16Gbps Max. Forwarding Rate: 11.90Mpps...