Cisco Catalyst WS-C2924-XL Hardware Installation Manual page 60

Installing the Switch in a Rack
Attaching the Brackets to a Catalyst 2912 LRE XL or 2924 LRE XL
Switch
Note
Catalyst 2900 Series XL Hardware Installation Guide
2-16
A Catalyst 2912 LRE XL or 2924 LRE XL switch can only be rack-mounted in a
19-inch rack. To attach the brackets to a Catalyst 2912 LRE XL or 2924 LRE XL
switch, use the supplied Phillips flat-head screws to attach the long side of the
bracket to the switch.
Do not install an LRE switch in a 23- or 24-inch rack. The mounting brackets
shipped with a Catalyst 2900 LRE XL switch cannot support the switch in a 23-
or 24-inch rack. If you install the switch in a 23- or 24-inch rack, the switch sags
towards the rear of the rack.
Figure 2-3, Figure 2-5,
a bracket to one side of the switch. Follow the same steps to attach the second
bracket to the opposite side of the switch.
Figure 2-6, Figure 2-7, and
Chapter 2 Installation
Figure 2-8 show how to attach
78-6461-04