Cisco Catalyst WS-C2924-XL Hardware Installation Manual page 35

Chapter 1 Product Overview
Table 1-5 Port Mode LEDs on Catalyst 2912 LRE XL and 2924 LRE XL Switches
Mode LED Port Mode
LRE LRE link status
STAT Port status
DUPLX Port duplex mode
SPEED Port speed
78-6461-04
Description
Long-Reach Ethernet (LRE) link status of the LRE ports on the
Catalyst 2912 LRE XL and Catalyst 2924 LRE XL switches.
Default mode on these switches only.
When the LRE mode is active, the 10/100 switch ports
Note
on the Catalyst 2912 LRE XL and
Catalyst 2924 LRE XL continue to show Ethernet link
status.
Ethernet link status of the 10/100 or 100BASE-FX switch ports
or the Ethernet link status on the remote CPE.
Default mode on all Catalyst 2900 XL and Catalyst 3500 XL
switches except the Catalyst 2912 LRE XL and
Catalyst 2924 LRE XL switches.
The port duplex mode: full duplex or half duplex. The default
setting is half duplex.
The port operating speed: 10 or 100 Mbps. The default setting
is auto.
Catalyst 2900 Series XL Hardware Installation Guide
Front-Panel Description
1-15