Epson Stylus Color 980 Printer Basics Manual page 48

Epson stylus color 980: user guide
Hide thumbs Also See for Stylus Color 980:
Table of Contents

Advertisement

Make sure the
Media Type
matches the paper you loaded. See
page 19 for guidelines.
Make sure your paper isn't
damaged, old, dirty, or loaded face
down. If it is, reload a new stack of
paper with the printable side up; it
is usually whiter or shinier than the
other side.
You see wrong or missing colors.
Make sure the Ink setting is set to
for color images and your
Color
application is set for color printing.
Make sure the print head nozzles
are not clogged. To clean the print
head, see page 21.
Make sure an ink cartridge isn't low
on ink. If either ink out light is
flashing, replace it; see page 25. If
an ink cartridge is more than six
months old, see page 27 for
replacement steps.
setting
Turn off PhotoEnhance
printing a high-resolution image.
Try using Automatic mode. See
page 9 (Windows) or page 14
(Macintosh) for instructions.
Your printed colors can never
exactly match your on-screen
colors. However, you can use a
color management system to get as
close as possible.
Your printout is grainy.
Try using a higher quality paper.
Set the Quality/Speed slider to the
Quality
software; see page 9 (Windows) or
page 14 (Macintosh).
Run the Print Head Alignment
utility. See page 29 for instructions.
You may need to increase the image
resolution or print it in a smaller
size; see your software
documentation.
if you're
setting in your printer
41

Advertisement

Table of Contents
loading

Table of Contents