Epson Stylus Color 980 Printer Basics Manual page 35

5. Pull up the ink cartridge clamp. The cartridge
rises up from its holder.
6. Lift the cartridge out of the printer and dispose
of it carefully.
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets into your eyes, flush them immediately with water.
7. Lower the new ink cartridge into its holder
with the label facing up and toward the back of
the printer.
8. Press the ink cartridge clamp down until it
locks in place.
9. Press the E load/eject button. The print head
moves to the color ink cartridge replacement
position. If you need to replace the color ink
cartridge, repeat steps 4 through 8. Then
continue with step 10.
10. Press the E load/eject button again and close the printer cover.
The printer moves the print head and begins charging the ink delivery system.
The P power light flashes and the printer makes various sounds.
Charging takes about one minute. When it's finished, the P power light stops
flashing and stays on.
Never turn off the printer while the P power light is flashing, unless
the printer hasn't moved or made noise for more than 5 minutes.
28