Energy-Saving Tips; Window Installation; Electric Shock Hazard; Installation Accessories - Danby DPAC10030 Owner's Manual

Energy-Saving Tips

Your Danby appliance is designed to be highly
efficient in energy savings. Follow these
recommendations for greater efficiency.
1) Select a thermostat setting that suits your
comfort needs and leave at that chosen setting.
2) The air filter is very efficient in removing airborne
particles. Keep the air filter clean at all times.
3) Use drapes, curtains or shades to keep direct
sunlight from penetrating and heating room, but
do not allow drapes or curtains to obstruct the air
flow around the unit.

Window Installation

Installation Accessories Fig. 1

Electric Shock Hazard

To avoid the possibility of personal
injury, disconnect power to the unit
before installing or servicing.
CAUTION
To avoid installation/operation difficulties,
read these instructions thoroughly.
Description
Flexible exhaust hose with adapters............................2/set
stretches from 17- /2" (44.5 cm) up to 55-1/2" (141 cm)
1
Adjustable window/patio door slider kit .....................4/set
from 26 5 /8" (67.5 cm) up to 80" (203 cm)
External Water Tank Accessories Fig. 1a
Support Tray & Castor ......................................................1 pc
External Tank & (2) Covers ..............................................1 pc
SPECIAL NOTE: The drain hose (standard garden hose) for
the direct drain application is not included with this unit but can
be purchased through any local Hardware Store.
The exhaust/window kit must be installed at all
times when the unit is operating under the AIR
CONDITIONING mode only.
WARNING
When the patio door kit is installed, it will not be
possible to lock the patio door.
THIS COULD POSE A SECURITY RISK!
Installation of a "FOOTBOLT" or "DROP BAR"
behind the door is suggested. (Available through
most local hardware stores)
4) Start your air conditioner before the outdoor air
becomes hot and uncomfortable. This avoids an
initial period of discomfort while the unit is cooling
off the room. Use of the automatic start/stop
programmable TIMER feature can be a major
asset in this regard if utilized to the fullest extent.
5) When outdoor temperatures are cool enough,
turn the air conditioner off and use the FAN
MODE on HIGH, MED or LOW. This circulates
indoor air, providing some cooling comfort and
utilizes less electricity.
There should be at least 11.8" (30 cm) clearance
between the unit and any other objects or building
structure. The unit should be installed on a level
surface. The window kit does not have to be
installed during Dehumidifying/Fan mode operation.
Fig. 1 Installation Accessories
Flexible Exhaust Hose (2)
17-1/2" - 55-1/2"
Quantity
Adjustable Window/Patio Door Slider Kit
Fig. 1 a External Water Tank Accessories
Support Tray & Castors (1)
4
Window Exhaust
26 5 / " - 80"
8
External Tank &
Quick Connect (1)
Adapter (2)