Dell 4320 User Manual page 48

P S
ROJECTOR ETTINGS
projector settings menu provides the following options:
A S
UTO OURCE
you press the Source button when the Auto Source mode is set to Off, you
can manually select the input signal. Select On to auto detect the available
input signals. If you press the Source button when the projector is on, it
automatically finds the next available input signal.
A K
UTO EYSTONE
caused by tilting the projector.
P
ROJECTOR
upon how the projector is mounted.
•Rear Projection-Desktop — The projector reverses the image so that you
can project from behind a translucent screen.
•Rear Projection-Ceiling Mount — The projector reverses and turns the
image upside down. You can project from behind a translucent screen with
a ceiling-mounted projection.
•Front Projection-Desktop — This is the default option.
•Front Projection-Ceiling Mount — The projector turns the image upside
down for ceiling-mounted projection.
S —
PEAKER
speaker.
C C
LOSED APTION
closed caption menu. Select appropriate closed caption options: CC1,
CC2, CC3, and CC4.
NOTE:
48 Using Your Projector
—
Select and press
—
Select Off (the default) to lock the current input signal. If
—
Select On to automatically adjust image distortion
M —
Allows you to select the projector mode, depending
ODE
Select On to enable the speaker. Select Off to the disable
—
Select On to enable close caption and activate the
Closed caption option is available for NTSC only.
to activate projector settings. The