Dhcp Server - D-Link Xtreme N Duo DAP-1522 User Manual

Wireless bridge
Hide thumbs Also See for Xtreme N Duo DAP-1522:
Table of Contents

Advertisement

Section  - Configuration
DHCP stands for Dynamic Host Control Protocol. The DAP-1522 has a built-in DHCP server. The DHCP Server will
automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be
DHCP clients by setting their TCP/IP settings to "Obtain an IP Address Automatically." When you turn your computers on,
they will automatically load the proper TCP/IP settings provided by the DAP-1522. The DHCP Server will automatically
allocate an unused IP address from the IP address pool to the requesting computer.
Enable DHCP
Check to enable the DHCP Server on the access
Server:
point.
IP Address From/
Enter the IP address range to assign to the
To:
clients on your network.
Note: If you statically (manually) assign IP
addresses to your computers or devices, make
sure the IP addresses are outside of this range
or you may have an IP conflict.
Default Subnet
Enter the subnet mask.
Mask:
Default Gateway:
Enter the default gateway IP address.
Default Wins:
Enter the WINS server IP address.
Default DNS:
Enter the DNS server IP address.
DHCP Lease
Enter the DHCP lease time (in minutes).
Time:
DHCP Client List:
Clients on your network that are assigned IP
addresses will be displayed here.
D-Link DAP-15 User Manual

DHCP Server

1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents