Waveform Display - Cortex HDC-3000 Setup Manual

Cortex hdc-3000 audio controller: user guide
Hide thumbs Also See for HDC-3000:
Table of Contents

Advertisement

Section Seven: Waveform Display
Waveforms are a visual representation of the program material. Using
the waveform display, you can not only see volume fluctuations in the
music but even when the "breakdowns" are coming. This can help to visu-
ally mix as well as mix by audio.
Waveforms can be created in two places-in the unit or in the Cortex DB
software. This can be downloaded from www.cortex-pro.com.
In the Edit menu you can choose if a waveform is created upon song
load or if it will be created offline. While we have included this feature
to be used in case of emergency, due to processing time we recommend
you create the waveform in the DB software so there is no delay in
being able to play your music. If you wish to cancel the creation of a
waveform then press the Enter button to cancel the process. If the same
song is loaded on both sides then only one side will create the wave-
form.
Waveforms will be displayed across the top of the screen, above the
progress bar. Sections of 5, 10, 20 and 40 seconds can be displayed on
the screen at any given time. Additionally, the user can choose if the
waveform itself scrolls or if the cursor runs along the bottom of a static
waveform.
Using the HDC-3000

Waveform Display

C r e a t i n g W a v e f o r m : 3 2 %
Press Enter To Cancel
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Fig 7.1 - Waveform Creation
Fig 7.2 - Waveform Display
P i t c h 1 . 0 5 %
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents