Page 3
We are confident that you and your callers will find your wireless phone to be a convenient and reliable way to stay in touch. Thank you for choosing Motorola...
Page 4
MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. TrueSync is a trademark of Starfish, Inc., a wholly owned independent subsidiary of Motorola, Inc. All other product or service names are the property of their respective owners.
Menu Map Main Menu Note: This is the standard menu layout. You or your service • Recent Calls provider may have modified the • Received Calls menu structure or changed some feature names. Not all • Dialed Calls features may be available for all •...
• Alert • Personalize • Alert Detail • Main Menu • Keys • Phone Status • Greeting • My Tel. Number • Banner • Battery Meter • Quick Dial • Other Information • Initial Setup • Connection • Time and Date •...
End phone calls, Send and answer exit menu system. calls, view recent dialed calls list. Smart Key Select menu items, Scroll Key send and end calls. Move through menus and lists. Accessory Connector Port Power Key Insert charger and Microphone...
A reference guide for your phone is also available that explains the phone’s features in more detail. To obtain a copy of the reference guide or another copy of this user guide, see the Motorola Web site at: http://motorola.com/consumer/manuals or contact the Motorola Customer Call Center at 1-800-331-6456.
About This Guide Optional Features Features marked with this label are optional network and/or subscription-dependent features. These features may not be offered by all service providers in all geographical areas. Contact your service provider for information about availability. Optional Accessories Features marked with this label require the use of an optional Motorola Original™...
The output power level typically may vary over a range from 0.05 watts to 0.54 watts in analog mode and 0.0 watts to 0.28 watts in digital mode. Exposure To Radio Frequency Energy...
Page 16
Protection (ICNIRP) 1998 • National Radiological Protection Board of the United Kingdom 1995 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 •...
Page 17
Holding the antenna affects call quality and may cause the phone to operate at a higher power level than needed. Phone Operation When placing or receiving a phone call, hold your phone as you would a wireline telephone. Speak directly into the microphone.
Page 18
RF energy. Aircraft When instructed to do so, turn off your phone when on board an aircraft. Any use of a phone must be in accordance with applicable regulations per airline crew instructions.
• NOT carry the phone in the breast pocket. • use the ear opposite the pacemaker to minimize the potential for interference. • turn OFF the phone immediately if you have any reason to suspect that interference is taking place. Hearing Aids Some digital wireless phones may interfere with some hearing aids.
Operational Warnings For Vehicles With an Air Bag Do not place a portable phone in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable phone is placed in the air bag deployment area and the air bag inflates, the phone may be propelled with great force...
Page 21
Safety and General Information Potentially Explosive Atmospheres Turn off your phone prior to entering any area with a potentially explosive atmosphere, unless the phone is a model specifically identified as being “Intrinsically Safe” for use in such areas (for example, Factory Mutual, CSA, or UL Approved). Do not remove, install, or charge batteries in such areas.
Batteries All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot.
Your digital wireless phone typically comes equipped with a battery and a charger. Other accessory options can customize your phone for maximum performance and portability. The following illustrations show a sample of the package contents. Note: Your phone and accessories may not look exactly as pictured. Battery Motorola...
1-800-331-6456 in the United States or 1-800-461-4575 in Canada. Installing the Battery Before you can use your phone, you need to install and charge the battery. Your phone is designed to be used only with Motorola Original batteries and accessories. We recommend that you store batteries in their protective cases when not in use.
Page 25
Getting Started Do This 1 Remove the battery from its protective clear plastic case. 2 If the phone’s battery door is already in place, push down the battery door release latch and lift the battery door off of the phone.
Getting Started Charging the Battery Before you can use your phone, you need to install and charge the battery. Do This 1 Plug the travel charger into your phone with the release tab facing up. 2 Plug the other end of the...
1 Open your phone expose the keypad 2 Press and hold turn on your phone (the power key) Power 3 Enter your four-digit unlock unlock your phone, if code and press necessary The unlock code is originally set to 1234. (For more information, see “Locking and Unlocking...
Getting Started Sending a Call To call a number, your phone must be turned on, be unlocked, and have a network connection with adequate signal strength. Do This 1 Extend the antenna optimize signal reception Tip: Your phone uses a two-stage antenna that must be fully extended for proper operation.
(end key) Receiving a Call To receive a call, your phone must be turned on and have a network connection with adequate signal strength. If your phone is locked, you must unlock the phone to answer the call.
Some of the phone functions described in this guide must be performed from the idle display. The term idle display refers to the standard display that you see when your phone is on and ready to use, when you are not on a call or using the menu system.
Page 31
Signal Strength Indicator Shows the strength of your phone’s connection with the network. Strong No signal You cannot send or receive calls when the “no signal” indicator is displayed. In Use Indicator Appears when a call is in progress. Roam Indicator Appears when your phone uses another network system outside your home network.
Page 32
The more segments visible, the greater the charge. High Empty Recharge your battery as soon as possible when you see the warning message. Low Battery Clock Shows the current time. Menu Indicator Indicates that you can press to open a menu.
Changing the Zoom Setting You can set your phone’s display to show either three lines or two lines of text plus soft key labels. Three lines of text display more information, while two lines increase text size. To change the display view, press...
(short)/red (long) roaming service By default, the status light indicator is turned off to extend battery life. See the “Status Light” item on page 65 to turn on the status light. Note: Turning on the status light will substantially reduce your phone’s standby time (the length of time that your phone’s...
(with volume flip opened) You can also use the volume keys to scroll up or down through menus and lists. To change keypad volume, see “Select a Ring/Vibration for a Specific Event” on page 117.
flip is closed. See the following section for details. External Display When your phone is on and the flip is closed, the external display shows the time and date. It also displays messages to notify you of events (like incoming calls) that need your attention.
(14°F) or above 45°C (113°F). Always take your phone with you when you leave your vehicle. • When you do not intend to use a battery for a while, store it uncharged in a cool, dark, dry place, such as a refrigerator.
Page 38
• The more you talk on the phone or use phone features (like sending text messages), the less standby time your battery has.
Sending and Receiving Calls For basic instructions on how to send a call, end a call, and receive a call, see page 26 of the “Getting Started” section. Redialing a Number If you hear an ordinary busy signal, the phone number you dialed is busy.
The calling line identification (caller ID) feature lets you see who is calling before you answer. • If the caller’s name is stored in your phonebook, the phone automatically displays the name. Otherwise, the phone displays the caller’s phone number.
Dialing an Emergency Number When the Phone is Locked Your service provider may program one or more emergency phone numbers that you can call even if your phone is locked or restricted. When you see in the display:...
You can use the notepad to store a phone number that you intend to call later (such as a phone number told to you by the other party during a call). To retrieve these digits, see “Using the Notepad”...
Sending and Receiving Calls Dialing With Speed Dial The speed dial feature lets you dial any phonebook entry with a minimal number of keypresses. Whenever you store an entry in your phonebook, the entry is assigned a unique speed dial number. If you know the speed dial number for the phonebook entry you want to call, you can use the speed dial feature.
Sending and Receiving Calls Dialing With One-Touch Dial You can call phonebook entries 2 through 9 with the push of a single key. Just press and hold the one-digit speed dial number for one second. It is recommended that you reserve location 1 in the phonebook for storing your voicemail number.
Text Msg Menu scroll to Call Back dial the number in the message SELECT If the message contains more than one phone number, press to scroll to a number and then press ) to dial. SELECT...
Sending and Receiving Calls Additional Dialing Features In addition to pressing numbers on your keypad, you can insert numbers or characters and send calls in a variety of ways. While dialing (with digits visible in the display): Do This Press...
Page 47
Sending and Receiving Calls You can also call numbers using these features: Do This To Call Press and release the voice key a phone number using the on the right side of your phone voice dial feature and say the entry’s name (in See “Recording a Voice...
If you subscribe to call waiting, an alert tone sounds while you are on a call to indicate that you have received a second call. To put the first call on hold and answer the second call: Press answer the new call switch back to the first call...
Using Features While On a Call Making a Three-Way Call During a call, you can call and connect a third party so that the three of you can talk together. You cannot do this if you already have a call on hold.
Using Features While On a Call Additional On-Call Features While you are on a call, you can perform the following tasks: Do This Press mute a call MUTE (if available) Press > Mute Press activate an attached SPEAKER (if available)
Using the Menu Navigating to a Feature You can access many of your phone’s features by using these keys to move through the menu system: Left Soft Key Right Soft Key Perform the Perform the function shown function shown in the lower left...
Using the Menu This guide shows you how to navigate to a specific menu feature as follows: > Find the Feature Recent Calls > Dialed Calls The > symbol means that you should scroll to and select the feature. This example shows that you must press...
• Press to scroll up or down to the item you want. • In a numbered list, press a number key to highlight the item. • In an alphabetized list, press a key multiple times to cycle through the letters on the key and highlight the closest matching list item.
Page 54
• When an item has a list of possible values, press to scroll through and select a value. • When an item has a list of possible numeric values, press a number key to set the value. • If you enter or edit information and then decide that you do...
Page 55
Using the Menu When you enter text, the flashing cursor changes to a block cursor , and the soft key functions change: Block cursor Press indicates Msg: to accept and current store the text. highlighted character. DELETE Press ) to...
Using the Menu Entering Text General Text Entry Rules Use the keypad to enter letters, numbers, and other characters. Press the same key repeatedly to cycle through available characters (see “Character Chart” on page 55): Press a number key to enter text at flashing cursor...
Predictive Text Entry with iTAP Software iTAP™ software provides a predictive text entry method that lets you enter the letters of a word using only one keypress per letter. Activating and Deactivating iTAP Software You must activate iTAP software prior to entering letters. You can...
Page 59
SELECT A space is automatically inserted after the word. 2 2 8 For example, to spell the word “act,” press . The display shows: Flashing Press cursor...
Page 60
Using the Menu Entering Novel Words You may enter a word that is not in the iTAP software dictionary. If you enter all the letters of a word but the word is not displayed: Do This 1 Press delete one or more letters until...
Page 61
Using the Menu Capitalization The first word of a sentence is automatically capitalized, with following words in lowercase. To set or adjust character capitalization: Press change the words to initial character capitalized, all uppercase characters, or all lowercase characters Entering Numbers...
Page 62
Using the Menu Deleting Letters and Words Place the cursor to the right of the text that you want to delete, and then do the following: Do This Press delete one letter at a time DELETE Press and hold delete the entire word...
find more detailed information. If you would like to learn more about a specific feature, a reference guide for your phone is also available. To obtain a copy of the reference guide or another copy of this user guide, see the Motorola Web site at: http://motorola.com/consumer/manuals...
Page 64
Adjust call timer display and beep settings. You can set your timer to beep at a selected interval during your calls. (60 seconds is the default.) You can also turn on or off a display timer during calls as follows:...
Page 65
Other Settings > Car Settings Adjust hands-free car kit settings. You can set your phone to route calls directly to the car kit when it detects a connection, and automatically answer calls after two rings. See “Hands-Free Use” on page 120.
Menu Feature Descriptions > Settings Headset > Other Settings > Headset Set your phone to automatically answer calls after two rings when connected to a headset. See “Hands-Free Use” on page 120. > Settings Initial Setup > Other Settings > Initial Setup...
Page 67
Menu Feature Descriptions Switch DTMF tones to be long, short, DTMF or off Set the language for phone menus Language Reset all options back to their original Master Clear factory settings except for the unlock code, security code, and lifetime timer,...
Page 68
> Network View and adjust your phone’s network settings. Your service provider registers your phone to a network. You can view information about the current network, change how your phone searches for a network, and turn on/off alerts that indicate when a call is dropped or network registration changes.
Page 69
Your service provider may program one or more quick dial numbers, such as the customer service number, into your phone. You can call them by selecting them from the quick dial list. Note: Your service provider may use a different name for...
Page 70
> Call Times View call timers. You can view five timers that track time spent on your last call, dialed calls, received calls, all calls since reset, and all calls total. See “Viewing and Resetting Call Times” on page 76.
Page 71
Menu Feature Descriptions You can use this notepad to view the last number you entered, even if you did not call the number. See “Using the Notepad” on page 74. > Received Calls Recent Calls > Received Calls View a list of recently received calls.
Page 72
Calls” on page 134. > Shortcuts HORTCUTS Create keypad or voice shortcuts to menu features. See “Shortcuts” on page 102. > Voice Notes OICE OTES Use the voice key to record messages and phone calls. See “Voice Notes” on page 107.
Recent Calls You can use the recent calls menu to view received calls or dialed calls, retrieve the last number stored in the notepad, and view or reset call times. Viewing the Received Calls or Dialed Calls List Your phone keeps lists of the numbers from calls you recently received and dialed, even if the calls did not connect.
Page 74
Recent Calls Press scroll to an entry you want to call, store, or delete < Note: means the call connected. call the entry’s number Tip: Press and hold for two seconds to send the entry number as DTMF tones. To activate DTMF tones, see the “DTMF”...
Page 75
Add digits to the end of the selected Add Digits number. Attach another number from the Attach Number phonebook or recent calls list to the end of the selected number. Send the selected number to the network Send Tones as DTMF tones, for credit card calling or password entry.
Recent Calls Using the Notepad Your phone uses a notepad to store the most recent string of digits entered—either for a phone number that you called or for a number that you entered but did not call. To call the number stored in the notepad, press from the idle display.
Recent Calls Call Times Your phone tracks and records call times. Use the recent calls menu to view and reset a call timer. Network connection time is the elapsed time from the moment you connect to your service provider's network to the moment you end the call by pressing .
Find the Feature Recent Calls Press scroll to Call Times open the list of timers SELECT scroll to the timer you want view the recorded time SELECT To reset the call timer: Press reset the time (if available) RESET confirm the reset...
Phonebook You can store a list of names and phone numbers in your phone’s electronic phonebook. Your phone can store as many as 400 entries. You can view these entries and call them directly from your phone. To see the list of names stored in your phonebook, press >...
Phonebook Storing a Phonebook Entry A phone number is required for a phonebook entry. All other information is optional. Shortcut: Enter a phone number in the idle display, then press ) to create a phonebook entry with the number in STORE field.
Page 81
Phonebook Press record a voice name for the entry, if RECORD desired See “Recording a Voice Name For a Go to step 11 if Phonebook Entry” on page 80. you do not want to record a voice name for the entry...
Recording a Voice Name For a Phonebook Entry You can record a voice name when you create a new phonebook entry, or when you edit a previously stored phonebook entry. This lets you use voice dial to call the number without dialing (see “Voice Dial”...
Page 83
5 Press begin the recording process RECORD The phone displays Press Voice key then say name 6 Press and release the voice record the voice name key on the right side of The phone displays Press your phone and say the Voice Key then REPEAT entry’s name (in two...
You can use the phonebook list, voice dial, speed dial, or one-touch dial to call the numbers stored in your phonebook. To use speed dial, see “Dialing With Speed Dial” on page 41. To use one-touch dial, see “Dialing With One-Touch Dial” on page 42.
VIEW edit the phonebook entry EDIT Edit a phonebook entry by following the procedures described in “Storing a Phonebook Entry” on page 78. Deleting a Phonebook Entry To delete a phonebook entry: >...
Phonebook Checking Phonebook Capacity You can check your phonebook’s capacity to see how many entries you have used and how many more are available. Your phonebook holds 400 entries. To check the phonebook capacity for your phone: Find the Feature >...
Phonebook Setting Up the Phonebook You can set up your phone to sort your phonebook list by speed dial number (the standard), name, or voice dial. Tip: The voice dial sort is identical to the name sort, except that the entries with voice name tags appear first.
The datebook is a calendar that lets you schedule and organize events such as appointments and meetings. You can review your schedule of events for the week or by the day, and have the datebook play a reminder alarm for specific events. To schedule or see events: >...
Datebook Day View Select a day in the week view and press ) to see the VIEW day’s events. You can store, edit, view, copy, and delete any event from the day view. Untimed Day of week event THU 19-NOV Alarm ¥...
Datebook Storing a New Event A title is required for a datebook event. All other information is optional. > day > Find the Feature Datebook > See “Selecting a Feature Option” on page 50 for instructions on scrolling to and selecting options.
Datebook Changing Event Information To change information about an existing event: > Find the Feature Datebook Press scroll to the scheduled event day display the day view VIEW scroll to the event you want to change display the event view...
Datebook Copying an Event To copy information from a current event to a new event: > Find the Feature Datebook Press scroll to the scheduled event day display the day view VIEW scroll to the event to copy open the...
Datebook Deleting an Event > Find the Feature Datebook Press scroll to the scheduled event day display the day view VIEW scroll to the event to delete open the Datebook Menu scroll to Delete select SELECT Delete For non-repeating events, go to step 7.
Note: The ) softkey option and menu feature Radio Radio are displayed only when the FM radio headset is plugged into the accessory connector port. Tuning a Station To tune a radio station with the radio on: Do This scroll up or down to the next...
Radio On Your phone interrupts the radio signal and rings or vibrates as usual to notify you of an incoming call, message, or other event. You can use the FM radio headset to converse with the other party during a call.
Contact your service provider for more details. Storing Your Voicemail Number Store your voicemail number in your phone to make it faster and easier to use voicemail. Your voicemail number is provided by your service provider.
To listen to your voicemail messages at any time: > > Find the Feature Messages VoiceMail Your phone calls the voicemail phone number you stored. If you do not have a voicemail number stored, the phone guides you through storing a number.
Received messages appear on your phone display or in your text message inbox. You must set up the text message inbox before you can send and receive these messages. The total number of messages the inbox can hold depends on the length of the messages, and the number of other messages and drafts stored in your phone.
DONE you finish entering all information Receiving a New Text Message Note: You must set up the text message inbox before you can receive text messages. When you receive a new message, your phone displays and gives an alert. If reminders are turned on, your Message phone sends a reminder every five minutes until you close the...
Messages in the text message inbox are sorted from newest to oldest. The oldest messages are deleted as new ones are added. If you want to save a message, you should lock it to prevent it from being overwritten as new messages are received.
Page 101
Text Msg Menu Option Description Call the number in the message header or Call Back the message text. Go to a Web address (URL) in the Go To message.
Messages—Text Option Description Open a new text message form. Open the inbox setup menu. Setup Sending a New Text Message To create and send a new text message: > > Find the Feature Messages Text Msgs > Press select CHANGE...
Viewing the Status of Sent Text Messages Text messages that you send are stored in the outbox. To view the contents of your outbox: Find the Feature > >...
Press (See “Recent Calls” on page 71.) User-Settable Shortcuts You can create shortcuts to many menu features and applications. A shortcut takes you directly to the menu item, or performs the menu action (if applicable).
You can assign a keypad shortcut, or both a keypad shortcut and a voice shortcut to a menu item. A voice shortcut lets you go directly to a menu item by saying its shortcut name. Your phone can store a total of five voice shortcuts.
Page 106
CHANGE number, if necessary Press select the default keypad DONE shortcut number and close the shortcut editor if you do not want to assign a voice shortcut Press scroll to if you want to Voice assign a voice shortcut...
The phone displays Trained: Voice Shortcut 9 Press close the shortcut editor DONE Using Shortcuts You can use a shortcut from the idle display, while on a call, or while scrolling through a menu.
Page 108
Use a Keypad Shortcut If you know the shortcut number: Press open the menu 2 the shortcut’s go to the menu item, or perform the number menu action Select a Shortcut From the List To select a shortcut from the shortcut list: >...
(That is, the combined recording time of all voice notes cannot exceed two minutes.) Use this procedure to record a voice note when the idle display is visible. Tip: Make your voice recording in a quiet location. Hold the phone about four inches (10 centimeters) from your mouth, and speak directly into the phone’s microphone in a normal tone of...
Page 110
Voice Notes Do This Result 1 Press and hold the voice A tone sounds in the key on the right side of earpiece and the phone your phone for the duration displays the Recording of the recording. message. Voice Note...
Voice Notes Viewing the Voice Notes List The voice notes list shows all your voice notes along with other important information and features. > Find the Feature Voice Notes Down scroll Time/date arrow recorded Voice Notes 2)2:20pm 6/1/00 Locked Play the...
Page 112
When a Motorola Original™ headset accessory or FM radio headset accessory is attached to your phone, voice note playback is automatically routed to the headset. Tip: You can play a voice note while taking a call. It won’t be transmitted to the other party. Playback Screen While the voice note is playing, the playback screen is displayed.
Page 113
Voice Notes Voice Note Controls While playing back a voice note, press these keys to do the following: If the voice note is unlocked, stop Stop playback playback and and go to Voice display Delete Notes Menu Voice Note? Stop playback...
Voice Notes Locking and Unlocking a Voice Note You can prevent a voice note from being accidentally deleted by locking it. To delete a locked voice note, you must first unlock it. > Find the Feature Voice Notes Press scroll to the voice note you want to...
Voice Notes Deleting a Voice Note You can delete a single unlocked voice note or all unlocked voice notes. To delete a locked voice note, you must first unlock it. See “Locking and Unlocking a Voice Note” on page 112. >...
Press scroll to a bookmark or service select the service SELECT Shortcut: If you open a text message with a Web address (URL) in it, you can go directly to the URL by selecting > Go To If you are unable to establish a network connection with the...
Micro-Browser Interacting With Web Pages You can perform the following operations on a Web page: Do This scroll through a text message Press scroll through and select items in a Press and then list SELECT Press keypad keys enter requested information...
Ring/Vibrate Your phone rings or vibrates to notify you of an incoming call, message, or other event. This ring or vibration is called an alert . You can use a standard alert for all events, or set different alert types for different events. The alert setting indicator in your...
Page 119
Adjusting Your Settings Select a Ring/Vibration for a Specific Event You can select the alert that your phone uses for a specific event (such as an incoming call) from 32 different preset tones and vibrations. When you select a ring or vibration alert for a specific event, it overrides the default alert set for all events.
Adjusting Your Settings Reminders Reminders are alerts that ring or vibrate to notify you about a voicemail or text message that you have received, or a datebook event that you have scheduled. To set or turn off reminders: Find the Feature >...
INSERT Customizing a Soft Key Function You can relabel the soft keys ( ) and the smart key to access different main menu items from the idle display. > Find the Feature Settings >...
Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.
Page 123
SELECT Power-Off Delay When your phone is connected to a car kit, you can set it to stay on for a specified time period after you switch off the ignition. This keeps your phone from draining your vehicle battery by staying on indefinitely, but leaves your phone on long enough...
Page 124
Charger Time When your phone is connected to a car kit, you can set it to charge itself for a specified time period after you switch off the ignition. This helps ensure that the phone battery gets fully charged while the vehicle is parked.
• use your phone as a wireless modem to connect to the Internet • use your phone to send and receive data and fax calls on your computer or hand-held device. More information about Motorola Original data kits is available http://www.motorola.com/dataaccessories .
Page 126
Data and Fax Calls Attaching a Serial Cable Use the interchangeable head on the Motorola Multi-Connect Serial Cable to connect a computer, Palm III device, or Palm V device to your phone. Do This 1 Plug the serial cable into the detachable head.
Install the Software Install the software from the CD-ROM that comes with your Motorola Original data kit. See the data kit’s user guide for more information. Sending a Data or Fax Call You can connect your phone to a computer or hand-held device to send data or a fax from the connected device.
Receiving a Data or Fax Call You can connect your phone to a computer or hand-held device to receive data or a fax. Use this feature to transfer data to your computer from another...
Page 129
External Device” on page 123.) Note: You cannot answer incoming voice calls when your phone is in data or fax mode. Any voice calls you receive are treated as unanswered calls. You must reset your phone to voice mode to...
Page 130
Reset Normal Voice Operation After you receive a data or fax call, you must reset your phone to resume normal voice operations. You cannot receive voice calls when your phone is in data or fax mode.
Page 131
Data and Fax Calls Do This 3 Press reset your phone to make and receive regular voice calls SELECT Your phone also reverts to normal voice operations when you turn it off and then turn it back on.
7 keypad keys re-enter the new code confirm the new code If You Forget a Code or Password If you forget your security code (originally set to 000000), contact your service provider.
You can lock your phone manually or set your phone to lock automatically whenever you turn it off. When you try to use a locked phone, it asks you to enter the unlock code. A locked phone still rings or vibrates for incoming calls or messages, but you must unlock it to answer .
Page 135
Security Set Your Phone to Lock Automatically You can set your phone to lock every time you turn it off: > > Find the Feature Settings Security > Phone Lock > > Automatic Lock Press 1 keypad keys enter your four-digit unlock code...
Note: Incoming calls and messages unlock the keypad. Restricting Calls You can stop all outgoing or incoming calls, or you can restrict them to the numbers stored in your phonebook. An incoming call that is restricted is treated as an unanswered call.
Page 137
SELECT Tip: The phonebook application is not locked when you restrict calls to numbers stored in the phonebook. To prevent a user from adding (and then calling) a new phonebook entry, you may want to lock the phonebook application under these...
Troubleshooting Check these questions first if you have problems with your phone: Question Answer Is your phone set Press . If you do not see your up correctly? phone number, contact your service provider. Is your battery The battery level indicator should have...
Page 139
The following refer to specific problems: Problem Solution My phone was Report a stolen phone to the police and stolen. To whom to your service provider (the company should I report that sends you your monthly wireless this? service bill).
Page 140
Be sure to press and hold until the power key, but display appears and you hear an nothing audible alert (this could take a couple of happened. seconds). If nothing happens, check that a charged battery is installed. (See “Installing the Battery” on page 22.)
Page 141
I cannot hear While on a call, press the upper volume others on my key on the left side of your phone. Your phone. phone display should show the volume increasing. Also, make sure that your phone’s earpiece is not blocked by its carrying case.
Page 142
See “Setting Up the Text Message Inbox” on page 96. How do I see the To see the most recent calls you dialed calls I sent or or received, open the “Recent Calls” received? lists: >...
Page 143
You can also use the feature Backlight (see page 64) to change the length of time that your phone’s backlight display stays on. My battery didn’t Your battery’s performance is affected last as long as I by charge time, feature use, expected.
Page 144
Troubleshooting Problem Solution I plugged the The beep indicates that you are set up data cable into correctly. If you did not hear a beep, my phone but my make sure that both ends of the data phone did not cable are connected—the smaller end...
Page 145
). If you do not see the indicator, you Available may be in an area that has only analog service or no service at all. If you see the digital signal indicator, you may be connected to a digital network that does not support Internet access.
Follow this procedure if you need to program your phone’s phone number or system ID. Note: Programming is normally done by a trained technician at the site of purchase. Users should not make changes other than ones in the following procedure. Before programming, ask your service provider for your: •...
Page 147
MIN display and 10-digit MIN enter the new MIN 4 Press store the new MIN 5 Similarly, enter appropriate numbers for the IMSI, MDN, AMPS SysID, and CDMA SysID 6 Press close the NAM1 list DONE 7 Press...
This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Page 149
FCC ID IHDT56AD1. 1. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known whether, to what extent, or through what mechanism, lower levels of RF might cause adverse health effects as well.
Page 151
What kinds of phones are in question? Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna that is positioned close to the user's head during normal telephone conversation. These types of mobile phones are of concern because of the short distance between the phone's antenna—the primary source of the RF—...
Page 152
First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the studies that showed increased tumor development used animals that had already been treated with cancer-causing chemicals, and other studies exposed the animals to the RF virtually continuously—up to 22...
Page 153
DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material. The cells in this assay showed changes after exposure to simulated cell phone radiation, but only after 24 hours of exposure.
Page 154
20 variables compared. 2 In a study of 209 brain tumor cases and 425 matched controls, there was no increased risk of brain tumors associated with mobile phone use. When tumors did exist in certain locations, however, they were more likely to be on the side of the head where the mobile phone was used.
Page 155
6 new cases per 100,000 people each year. At that rate, assuming 80 million users of mobile phones (a number increasing at a rate of about 1 million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones.
Page 156
In the absence of conclusive information about any possible risk, what can concerned individuals do? If there is a risk from these products—and at this point we do not know that there is—it is probably very small. But if people...
Page 157
For example, time is a key factor in how much exposure a person receives. Those persons who spend long periods of time on their hand-held mobile...
Page 158
Malignant Brain Tumors. In: State of the Science Symposium;1999 June 20; Long Beach, California. 2. Tice et al. Tests of mobile phone signals for activity in genotoxicity and other laboratory assays. In: Annual Meeting of the Environmental Mutagen Society; March 29, 1999, Washington, D.C.; and personal communication, unpublished results.
Motorola (Products). • Batteries. Defects in materials and workmanship in batteries that are manufactured by Motorola and/or sold with Products are covered by this warranty only if the fully- charged capacity falls below 80% of rated capacity or they leak.
Page 160
This warranty extends to the first end-user purchaser, only. IV. What We Will Do to Correct Warranty Problems At no charge to you, we have the option to repair or replace the Products or software that do not conform to the warranty, or to refund the Products’...
Page 161
Motorola. You must ship the Products to us with freight, duties and insurance prepaid. Along with the Products you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem;...
Page 162
Any of these voids the warranty. • Defects or damage that result from: (a) use of the Products in a manner that is not normal or customary; (b) improper operation or misuse; (c) accident or neglect such as dropping the Products onto hard surfaces;...
Page 163
• Failure of Products that is due primarily to any communication service or signal you may subscribe to or use with the Products. • Coil cords that are stretched or that have any broken modular tabs. • Products that are leased.
Page 164
United States patent. Our obligation is conditioned on: (a) you notifying us promptly in writing when you receive notice of the claim; (b) you giving us sole control of the defense of the suit and all negotiations for its settlement or compromise; and...
Page 165
Warranty Motorola will have no liability to you with respect to any claim of patent infringement that is based upon the combination of the Products or parts furnished under this limited warranty with ancillary equipment, as defined in VI., above.
Page 166
1-800-353-2729 TTY (Text Telephone) 1-888-390-6456 Canada All Products 1-800-461-4575 TTY (Text Telephone) 1-888-390-6456 To correspond with Motorola about the Products, please write us at http://www.motorola.com or at: In the USA: Motorola, Inc. 600 North U.S. Highway 45 Libertyville, IL 60048...
Patent Information Manufactured under one or more of the following U.S. patents: 4291475 4616314 4797947 4890199 4977589 5036532 4302845 4617520 4798975 4896124 4977616 5038253 4312074 4628529 4802236 4896361 4979207 5040127 4365221 4629829 4803726 4897873 4984219 5042071 4369516 4633141 4809356 4903326...
Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations.
Page 177
Index headset automatic answer 120 fax call FM radio 68, 92 connecting to external use with external display 35 device 61, 123–125 headset jack 5 incoming call format, setting holster 21 receiving 126–129 sending 125–126 idle display, defined 28 flashing cursor, defined 52 in use indicator flip...
Page 178
58 voice notes 112 lock application feature 69 loud ring alert 30, 116 end 5, 27, 49 left soft key 5, 49, 119 making a call 26 lock 134 master clear 65 menu 5, 27, 49 master reset 65...
Page 179
Index menu (continued) micro-browser (continued) rearranging features defined 61, 114 118–119 functions 115 scroll feature 65 go back to previous page 99–100 Text Msg Menu using features 11, 50–53 starting 114 109, microphone 5 Voice Notes Menu 110, 111 missed call indicator 38...
Page 180
65 passwords turning on/off 25 changing 70, 130 unlock code 132 default 130 unlocking 25, 132–133 if you forget a password voice dial 45 131–132 phone number patents 165–170 adding digits after 73 pause character 44 attaching to prefix digits 44...
Page 181
66 using 67 type, selecting 117 quick note 63 ring and vibrate alert indicator 30, 116 ringer radio 68, 92–93 setting in external display received calls list 45, 69, 71–73 volume, adjusting 33, 117 receiving a call 27...
Page 182
65 by 85 scroll key 5, 49 using 41 security code 131 standby time send key 5, 26, 27, 71 defined 32 sending a call 26 increasing 36 short message service. See text status light 5, 31–32, 65...
Page 183
Index time, setting 65 voice key (continued) timers recording a voice name 81 described 75 recording a voice note resetting 76 107–108 viewing 68, 76 voice message waiting travel charger indicator 29, 30 charging phone battery 24 voice name illustration 22 defined 80...
Page 184
Index volume earpiece 33 keypad 117 ringer 33, 117 volume keys 5, 32 wait character 44 warranty 157–164 Web pages functions 115 viewing 114 zoom setting 31, 65...
1 Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2 When available, use a hands-free device. If possible, add an additional layer of convenience to your wireless phone with one of the many Motorola Original™...
Page 186
3 Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.
Page 187
* Wherever wireless phone service is available.
Page 188
Check the laws and regulations on the use of wireless telephones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. For more information, please call...