Brother MFC-J625DW Basic User's Manual page 98

Printing (continued)
Difficulty
Poor print quality.
White horizontal lines appear in text
or graphics.
The machine prints blank pages.
Characters and lines are blurred.
Printed text or images are skewed.
Smudge or stain at the top center of
the printed page.
Printing appears dirty or ink seems
to run.
Stains appear on the reverse side
or at the bottom of the page.
The machine prints dense lines on
the page.
84
Suggestions
Check the print quality. (See Checking the print quality uu page 65.)
Make sure that the Media Type setting in the printer driver or the Paper Type
setting in the machine's menu matches the type of paper you are using.
See Paper Type uu page 21.
uuSoftware User's Guide: Printing (Windows
uuSoftware User's Guide: Printing and Faxing (Macintosh)
Make sure that your ink cartridges are fresh. The following may cause ink to clog:
 The expiration date written on the cartridge package has passed. (Genuine
Brother Innobella™ ink cartridges stay usable for up to two years if kept in their
original packaging.)
 The ink cartridge has been in your machine for over six months.
 The ink cartridge may not have been stored properly before use.
Make sure you are using Genuine Brother Innobella™ Ink. Using non-Brother
supplies may affect the print quality, hardware performance, and machine
reliability.
Try using the recommended types of paper.
(See Acceptable paper and other print media uu page 22.)
The recommended environment for your machine is between 68 F to 91 F
(20 C to 33 C).
Clean the print head. (See Cleaning the print head uu page 65.)
Make sure you are using Genuine Brother Innobella™ Ink.
Try using the recommended types of paper.
(See Acceptable paper and other print media uu page 22.)
Clean the print head. (See Cleaning the print head uu page 65.)
Make sure you are using Genuine Brother Innobella™ Ink.
Check the printing alignment. (See Checking the print alignment uu page 66.)
Make sure the paper is loaded properly in the paper tray and the paper side guides
are adjusted correctly. (See Loading paper and other print media uu page 12.)
Make sure the Jam Clear Cover is closed properly.
Make sure the paper is not too thick or curled.
(See Acceptable paper and other print media uu page 22.)
Make sure you are using the recommended types of paper. (See Acceptable paper
and other print media uu page 22.) Don't handle the paper until the ink is dry.
Make sure you are using Genuine Brother Innobella™ Ink.
If you are using photo paper, make sure that you have set the correct paper type.
If you are printing a photo from your PC, set the Media Type of the printer driver.
Make sure the printer platen is not dirty with ink. (uuAdvanced User's Guide:
Cleaning the machine's printer platen)
Make sure you are using Genuine Brother Innobella™ Ink.
Make sure you are using the paper support flap.
(See Loading paper and other print media uu page 12.)
Make sure the paper feed rollers are not dirty with ink.
(uuAdvanced User's Guide: Cleaning the paper feed rollers)
Check Reverse Order in the Basic tab of the printer driver.
®
)