Using External And Extension Telephones; Using A Non-Brother Cordless External Telephone; Using Remote Codes - Brother MFC-J625DW Basic User's Manual

Brother mfc-j625dw: user guide
Hide thumbs Also See for MFC-J625DW:
Table of Contents

Advertisement

Chapter 6
Using external and extension
telephones
Using extension telephones
If you answer a fax call at an extension
telephone, you can make your machine
receive the fax by pressing the Fax Receive
Code l 5 1.
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at an extension telephone by
pressing the Telephone Answer Code # 5 1.
(See F/T Ring Time (Fax/Tel mode only)
uu page 36.)
Using an external telephone
(connected to the EXT. jack of the
machine)
If you answer a fax call at the external
telephone connected to the EXT. jack of the
machine, you can make the machine receive
the fax by pressing Black Start and choosing
Receive.
You can also use the Fax Receive code l 5 1.
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone by
pressing Hook.
If you answer a call and no one is on
the line:
You should assume that you're receiving a
manual fax.
Press l 5 1 and wait for the chirp or until the
screen shows Receiving, and then hang
up.
Note
You can also use the Easy Receive
feature to make your machine
automatically take the call. (See Easy
Receive uu page 37.)
44
Using a non-Brother cordless
external telephone
6
If your non-Brother cordless telephone is
connected to the EXT. jack of the machine
and you typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Hook to send the call to the cordless handset.

Using remote codes

Fax Receive code
If you answer a fax call on an extension
telephone, you can tell your machine to
receive it by dialing the Fax Receive Code
l 5 1. Wait for the chirping sounds and then
replace the handset. (See Easy Receive
uu page 37.)
If you answer a fax call at the external
telephone connected to the EXT. jack of the
machine, you can make the machine receive
the fax by pressing Black Start and choosing
Receive.
Telephone Answer Code
If you receive a voice call and the machine is
in Fax/Tel mode, it will start to sound the F/T
6
(pseudo/double) ring after the initial ring
delay. If you pick up the call on an extension
telephone you can turn the F/T Ring off by
pressing # 5 1 (make sure you press this
between the rings).
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone
connected to the EXT. jack of the machine by
pressing Hook.
6
6
6
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j280w

Table of Contents