Connecting Your Qip Receiver To A Stereo Tv (Sdtv) And Stereo Vcr; Connecting A Stereo Tv (Sdtv) And Stereo Vcr - Motorola QIP7200 Series User Manual

6 CONNECTING YOUR QIP RECEIVER

Connecting Your QIP Receiver to a Stereo TV (SDTV) and Stereo VCR

Connecting a Stereo TV (SDTV) and Stereo VCR

1. Connect a stereo audio cable to the AUDIO OUT L and R connectors on the
QIP7200 receiver and the INPUT AUDIO L and R connectors on the stereo VCR.
2. Connect a video cable to the VIDEO OUT connector on the QIP7200 receiver and
the INPUT VIDEO connector on the stereo VCR.
3. Connect a stereo audio cable to the OUTPUT AUDIO L and R connectors on the
Stereo VCR and the INPUT AUDIO LEFT and RIGHT connectors on the Stereo TV
(SDTV).
4. Connect a video cable to the output video connector on the stereo VCR and the
input video connector on the Stereo TV (SDTV).
Note: You can also connect using the S-Video connectors if supported by your stereo
VCR.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting your QIP Receiver to an HDTV — Video Only on page
25
17 .