Rear Panel - Motorola QIP7200 Series User Manual

1 INTRODUCTION

Rear Panel

1 Cable In — Connects to cable signal from your service provider
2 RF Out — Ch 3/4 modulated audio/video (SDTV) to TV or VCR
3 IR remote input
4 M-Card — Inserted M-Card
5 Serial — Service only
6-7 Digital Audio (S/PDIF) — Provides Dolby
S-Video — Connects to S-Video (SDTV) input of TV or VCR
8
Video/Audio Out — Composite Video (SDTV) /L/RAudio outputs
9
Component video output (HDTV) — YPbPr connections
10
HDMI — High-Definition TV (HDTV) connector
11
12 eSATA* — External Serial ATA disk interface
13 USB* 2.0 — High-Speed peripheral device connection
14 IEEE-1394 — Audio and video device connection
15 Ethernet* — Network connection
16 Power cord connector
* Availability of certain features is dependent upon application support.
®
Digital 5.1 audio or PCM output
3