Sign in today to find solutions:

Don't have an account? Sign up

 
motorola
H560
Quick Start Guide
1
CHARGE
Your Headset's Battery
1
Verify slide switch is in the off position (toward
the charging port).
2
Plug the Motorola charger into the end of the
headset.
The indicator light turns red or yellow when the
battery is charging. It may take up to 1 minute
for the indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the indicator light turns green.
3
Disconnect the charger.
Note: Headset is not functional while charging.
Note: This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H560 Headset.
Volume
Buttons
Call
Button
Power
Switch
2
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
M
1
Menu
> Settings > Connection >
Press
(
)
Bluetooth Link > Setup.
2
Scroll to Power.
3
Select Change.
4
Scroll to On.
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
Ear
Speaker
Microphone
Indicator
Light
Next page ->

Summary of Contents

  • Page 1

    BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H560 Headset. motorola H560 Speaker Volume Buttons Microphone...

  • Page 2

    Bluetooth QD ID: B014245 your phone. Enter the passkey: 0000 MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their Select OK. accessories may be prohibited or restricted in certain areas.

  • Page 3

    Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode.

  • Page 4

    H560 blue and purple (if connected with a device) Bluetooth® or is steadily blue (if ready to be paired). Handsfree Headphones To turn your headset off, slide the switch toward the charging plug (the orange color under the switch is displayed).

  • Page 5

    CHANGING FOR USE CHANGING VOLUME ON OTHER EAR BUTTON ORIENTATION You can wear your H560 headset on your left or You can also change the orientation of the right ear. The headset comes ready for the right volume buttons on your headset.

  • Page 6

    Quick red flash Low battery Two rapid descending Mute disabled tones Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. Low tone every Mute reminder 10 seconds...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: