Wireless Settings - D-Link DIR-615 User Manual

Section 3 - Configuration
Enable Wireless: Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. Click Add New to create your
own time schedule to enable the wireless function.
Wireless Network Service Set Identifier (SSID) is the name of your
Name:
wireless network. Create a name using up to 32
characters. The SSID is case-sensitive.
802.11 Mode:
Select one of the following:
802.11g Only - Select if all of your wireless clients
are 802.11g.
Mixed 802.11g and 802.11b - Select if you are
using both 802.11b and 802.11g wireless clients.
802.11b Only - Select if all of your wireless clients
are 802.11b.
802.11n Only - Select only if all of your wireless
clients are 802.11n.
Mixed 802.11n, 802.11b, and 802.11g - Select
if you are using a mix of 802.11n, 11g, and 11b
wireless clients.
Mixed 802.11n and 802.11g - Select if you are using
a mix of 802.11n and 802.11g wireless clients.
Enable Auto
The Auto Channel Scan setting can be selected to
Channel Scan:
allow the DIR-615 to choose the channel with the least
amount of interference.
Wireless Channel:
Indicates the channel setting for the DIR-615. By default the channel is set to 6. The Channel can be changed to fit the
channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan,
this option will be greyed out.
Transmission Rate:
Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
D-Link DIR-615 User Manual

Wireless Settings

28