Applying Effects - Yamaha CL3 Owner's Manual
Digital mixing console
Hide thumbs
Also See for CL3:
- Service manual (401 pages) ,
- User manual (37 pages) ,
- Installation manual (9 pages)
Table of Contents
Advertisement
4.
Select an input source in the left column of
the CH SELECT popup window, then select a
channel in the right column.
5.
Press the CLOSE button.
6.
In the same way, press the OUTPUT PATCH
button, and select the return destination in
the CH SELECT popup window.
NOTE
If you use GEQ for INSERT channels, the OUTPUT
PATCH will be set up automatically.
7.
Press the GEQ icon to open the GEQ popup
window.
8.
Press FADER ASSIGN to select the GEQ you
will control using the Centralogic section’s
faders.
9.
Perform the same operations for other GEQs
as desired.
NOTE
The graphic EQ in the GEQ rack can be used only for the
output channels. If you wish to use GEQ for the input
channels, mount the graphic EQ on the EFFECT RACK.
Applying effects
Applying effects
Using EFFECT RACK with send/return
1.
Press the RACK button in the display screen.
2.
Press the EFFECT tab.
3.
Modify the INPUT CH/OUTPUT CH patch
settings, if necessary.
4.
Press the rack icon in the middle to open the
EFFECT popup window.
5.
Press the effect icon.
6.
Select an effect you want to use from the
EFFECT TYPE popup window.
7.
In the Channel Strip section, select the bank
that includes the channel to which you want
to apply the effect.
Page 43
- Quick Links:
- Audio Input/Output Connections
Hide quick links:
Advertisement
Table of Contents
