Setting The Sound Field Program; Prohibiting Setting Changes - Yamaha HTR-5063 Owner's Manual

■
Goes enter standby mode automatically
when you leave it without operating
AutoPowerDown
If you do not operate this unit or use the remote control for an
extended period of time, it will automatically go into standby mode
(Auto Power Down function). This function's default setting is
"Off." When you want to enable this function, set the amount of
time to pass before this unit will enter standby.
Off (Default) Auto Power Down function is disabled.
4hours Goes into standby mode, when you have not operated
this unit for four hours.
8hours Goes into standby mode, when you have not operated
this unit for eight hours.
12hours Goes into standby mode, when you have not operated
this unit for twelve hours.
This unit starts a countdown of 30 seconds before entering the
standby mode. Pressing any key of the remote control during the
countdown cancels entering the standby mode and reset the
timer.
■
Setting the brightness of the front panel
display
Dimmer
Sets the brightness of the front panel display. Lowering the setting
dims the display.
Adjustable range -4 to 0
Default setting 0
■
Adjusting the position of On-Screen
Display
OSD Shift
Adjusts the top and bottom positions of menus displayed on the
TV.
Increase this value to raise the menu, or decrease the value to lower
it.
Adjustable range -5 to 0 to +5
Default setting
0
Setting various functions (Setup menu)

Setting the sound field program

You can set the parameters for the sound field programs
MOVIE
.
Sci-Fi
;
SUR. Dolby PLIIxMovie
;;;;;;;;
DSP Level
Initialize
p [
[ ]/[ ]:Select

Prohibiting setting changes

;
Memory Guard
Off >On
[p]/[[]:Select
[RETURN]:Return
Prohibits setting changes to prevent careless changes being made
to the settings on Setup menu.
Off (Default)
Settings are not protected.
On
Prohibits changes to the settings on Setup menu until
it is returned to "Off."
While set to "On," the unit displays "Memory
Guard!" when an attempt is made to change the
settings.
When this parameter is switched to "On," "
the Setup menu is displayed on the TV.
SETUP
(☞p. 60).
0dB
G
G " appears while
59
En