Yamaha HTR-5063 Owner's Manual page 52

■
Controlling the volume of each speaker
Level
Separately adjusts the volume of each speaker. Use
to select the desired speaker and adjust the volume with
D / E.
FR.L
Front speaker L
FR.R
Front speaker R
CNTR
Center speaker
SUR.L
Surround speaker L
SUR.R Surround speaker R
SBL Surround back L
SBR
Surround back R
SB J1
Surround back
SWFR
Subwoofer
Adjustable range -10.0 dB to +10.0 dB
Default setting 0 dB (FR.L/FR.R/SWFR)
-1.0 dB (CNTR/SL/SR/SBL/SBR/SB)
Adjustment 0.5 dB
increments
J J
1 : "SB" and "Sur.B" is displayed when using a 6.1 channel configuration only.
J
2 : Using YPAO to carry out acoustic measurement selects "Auto PEQ"
automatically. "Auto PEQ" does not appear if the measurement process has not
been carried out at least once.
■
Manually setting speaker distance
Distance
jCursor B / C
Adjusts the timing at which the speakers produce audio so that
jCursor
sounds from the speakers reach the listening position at the same
time.
Selecting adjustment units
jCursor B / C
Use
to choose the units of length (meters or feet).
Setting distances for each speaker
jCursor B / C
Use
jCursor D / E
and then use
to your listening position.
Unit
Selects the distance unit (meters or feet).
Front L
Front speaker L
Front R
Front speaker R
Center
Center speaker
Sur. L Surround speaker L
Sur. R Surround speaker R
Sur. B L Surround back speaker L
Sur. B R
Surround back speaker R
Sur. B J1
Surround back speaker
SWFR
Subwoofer
Adjustable range 0.30 m to 24.0 m (1.0 ft to 80.0 ft)
Default setting 3.00 m (10.0 ft) (Front L/Front R/SWFR)
2.60 m (8.5 ft) (Center)
2.40 m (8.0 ft) (Sur. L/Sur. R/Sur.B L/Sur.B R/Sur.B)
Adjustment 0.10 m (0.5 ft)
increments
jCursor D / E
to select "Unit," and then use
to select the speaker you want to configure,
to set the distance from the speaker
Setting various functions (Setup menu)
■
Adjusting sound quality with the equalizer
Equalizer
Adjusts sound quality of tone using a parametric or graphic
equalizer.
EQ Type Select
Select an equalizer type.
Auto PEQ
Uses the parametric equalizer to adjust sound quality.
Selecting this setting applies the tone settings
obtained using YPAO (☞p.
The acoustic characteristics (EQ Type) selected when
YPAO has been carried out is displayed under Auto
PEQ.
GEQ (Default)
Uses the graphic equalizer to adjust sound quality. By
j
pressing ENTER, you can adjust the
characteristics of the graphic equalizer.
Off
Disables the equalizer.
SETUP
J2
24).
52
En