Yamaha HTR-5063 Owner's Manual page 25

TRANSMIT CODE SET
SOURCE RECEIVER
SLEEP
5 If necessary, press
HDMI
and select the measuring acoustic
1 2 3 4
AV
characteristics in the "EQ Type" setting.
1 2 3 4
AUDIO
During YPAO, the results of measuring the acoustic
5 6 1 2
characteristics are used to set the equalizer (parametric
V-AUX [ A ] [ B ] DOCK
equalizer) to give a unified sound field. After setting,
TUNER
you can select the characteristics of the sound field in
FM AM
"EQ Type," as necessary.
PRESET TUNING
INFO MEMORY
ENHANCER SUR. DECODE
MOVIE MUSIC STEREO Natural
STRAIGHT DIRECT
(Default)
SCENE
Flat
BD i
TV CD RADIO
DVD
SETUP OPTION
q
j
ENTER VOLUME
RETURN
DISPLAY
TOP POP-UP
MUTE
MENU MENU
Front
REC
1 2 3 4
5 6 7 8
9 0 10 ENT
TV
This completes preparations. To achieve more
INPUT
TV VOL TV CH
accurate results, be careful of the following when
MUTE
measuring.
• Measuring will take approximately 3 minutes. Keep
the room as quiet as possible during measurement.
i
SETUP • Wait in the corner of the listening room during
j
Cursor B / D / E
measurement or leave it entirely, to avoid becoming an
j
ENTER
obstruction between the speakers and the YPAO
q
OPTION
microphone.
J
1 : You can also select "EQ Type" using the cursor keys. Press
j
Cursor B
j
Cursor D /
using
qOPTION
repeatedly
J1
Adjusts all speaker sound to give natural
acoustics.
Sets uniform characteristics for each
speaker. Choose this when all of the
speakers used are of the same quality. If
the treble range sounds harsh after
adjustment, select "Natural" and measure
again.
Sets the characteristics of each speaker to
match the front speakers. Choose this
when the front speakers are of
significantly higher quality than the other
speakers.
to select "EQ Type," and you can change the setting
E.
iSETUP
6 Press to start measurement.
Display during measurement
Auto Setup
;
Initializing
;
.
Pre Check
;
Main Check
;
Calculation
;
Level
Check CH = Front L
;;;;;;;;;;;;;;;02%
[ ] :Exit
The following display appears when measurement
finishes without any problems.
Auto Setup
RESULT
SP : 3/4/0.1
DIST: 2.50/ 3.00m
LVL : -1.0/ +1.5dB
.
>Set Cancel
[p]/[[]:Select
[ENTER]:Finish
SP
Displays the number of speakers connected to this unit in
the following order:
Total of Front and Center/Total of Surround and
Surround Back/Subwoofer
DIST
Displays the speaker distance from the listening position
in the following order:
Closest speaker distance/Farthest speaker distance
LVL
Displays the speaker output levels in the following order:
Lowest speaker output level/Highest speaker output level
CONNECTIONS
Set up the speaker parameters automatically (YPAO)
NOTE
When a problem occurs, an error message or report
appears either during or after measurement. Use the
following page as a reference to solve the problem,
and carry out YPAO again.
Press jENTER to apply the results of
7
measurement.
Auto Setup
AUTO SETUP Finished
Disconnect Microphone
PRESS [ENTER]
[SETUP]:Exit
If you want to carry out measurement again, press
jCursor E
to select "Cancel" and press
jENTER. After this operation, use the same
procedure to carry out YPAO again.
Remove the YPAO microphone.
8
YPAO finishes automatically when the YPAO
microphone is removed.
The YPAO microphone is sensitive to heat. When you
have finished measuring, store the microphone out of
direct sunlight, and away from locations that may
experience high temperatures, such as on top of AV
equipment.
25
En