Power Requirements; Product Spec - CYBEX 350A User Manual

www.cybexinternational.com 3

POWER REQUIREMENTS

Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE PROVIDER IF YOU ARE IN DOUBT AS TO WHETHER THE
UNIT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT. IF THE PLUG WILL NOT
FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
The Home Arc Trainer can be seriously damaged by sudden voltage changes in your home's electrical power. Voltage spikes,
surges and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the
possibility of damage, always use a surge protector (not included) with your unit.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a
UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an
electrical rating 120VAC, 15 amps.
This Home Arc Trainer must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for
electric current, should the Home Arc Trainer malfunction. This unit comes with an electrical cord having an equipment-grounding
conductor and a grounding plug. As shown in the diagrams below, always plug the power cord into a surge protector, and plug the
surge protector into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This Home Arc Trainer is for use on a nominal 115 VAC +/- 5%, 50/60 Hz and 15 amps; or 230
VAC +/- 10%, 50/60 Hz and 10 amps.

Product Spec:

Product dimensions : L70.7 x W28.5 x H62.3 INCH
Product weight: 300 LBS.
Power required : 110 v